R 408.13301a Adopted and referenced standards.

Rule 3301a. (1) The following standards are adopted by reference in these rules and are available from IHS Global, 15 Inverness Way East, Englewood, Colorado, 80112, USA, telephone number: 1-800-854-7179, www.global.ihs.com, at a cost as of the time of adoption of these rules, as stated in these rules. (a) American National Standards Institute Standard (ANSI) Z-41 "American National Standard for Personal Protection -- Protective Footwear," 1999 edition. Cost $25.00. (b) ANSI/ISEA (International Safety Equipment Association) Z-87.1 “Occupational and Educational Personal Eye and Face Protection Devices,” 2010 edition. Cost $60.00. (c) ANSI Z-87.1 “Occupational and Educational Personal Eye and Face Protection Devices,” 2003 edition. Cost $68.00. (d) ANSI Z-87.1 “Practice for Occupational and Educational Eye and Face Protection,” 1989 edition, revised 1998. Cost: $148.00. (e) American Society of Testing Materials Standard (ASTM) D-120 “Standard Specification for Rubber Insulating Gloves,” 2009 edition. Cost: $58.00. (f) ASTM D-178 “Standard Specification for Rubber Insulating Matting,” 2001 edition with 2010 supplement. Cost $47.00. (g) ASTM D-178 “Standard Specification for Rubber Insulating Matting,” 1993 edition. Cost $56.00. (h) ASTM D-1048 “Standard Specification for Rubber Insulating Blankets,” 2012 edition. Cost $47.00. (i) ASTM D-1049 “Standard Specification for Rubber Insulating Covers,” 1998 edition with 2010 supplement. Cost $47.00. (j) ASTM D-1050 “Standard Specification for Rubber Insulating Line Hose,” 2005 edition with 2011 supplement. Cost $47.00. (k) ASTM D-1051 “Standard Specification for Rubber Insulating Sleeves,” 2008 edition. Cost $58.00. (l) ASTM F-478 “Standard Specification for In-Service Care of Insulating Line Hose and Covers,” 2009 edition. Cost $52.00. (m) ASTM F-479 “Standard Specification for In-Service Care of Insulating Blankets,” 2006 edition with 2011 supplement. Cost: $47.00. (n) ASTM F-496 “Standard Specification for In-Service Care of Insulating Gloves and Sleeves,” 2008 edition. Cost $58.00. (o) ASTM F-2412 “Standard Test Methods for Foot Protection,” 2005 edition. Cost $64.00. (p) ASTM F-2413 “Standard Specification for Performance Requirements for Protective Footwear,” 2005 edition. Cost $56.00. (q) ASTM F-819 “Standard Terminology Relating to Electrical Protective Equipment for Workers,” 2010 edition. Cost $41.00. (r) ASTM F-1236 “Standard Guide for Visual Inspection of Electrical Protective Rubber Products,” 1996 edition with 2012 supplement. Cost: $47.00. (s) Institute of Electrical and Electronics Engineers IEEE Standard 516 “Guide for Maintenance Methods on Energized Power Lines,” 2009 edition. Cost: $135.00. (2) The following standards are adopted by reference in these rules and are available from Document Center, Inc., Customer Service, 121 Industrial Road, Suite 8, Belmont, CA 94002, USA, telephone:(650) 591-7600 or via the internet at website: www.document-center.com; at a cost as of the time of adoption of these rules, as stated in these rules. (a) ANSI Z-89.1 "American National Standard for Industrial Head Protection," 2009 edition. Cost $61.25. (b) ANSI Z-89.1 "American National Standard for Industrial Head Protection," 2003 edition. Cost: $20.00. (c) ANSI Z-89.1 "American National Standard for Personnel Protection—Protective Headwear for Industrial Workers--Requirements," 1997 edition. Cost: $20.00. (3) The standards adopted in these rules are available for inspection at the Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, P.O. Box 30643, Lansing, Michigan, 48909-8143. (4) Copies of the standards adopted in these rules may be obtained from the publisher or may be obtained from the Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section, P.O. Box 30643, Lansing, Michigan, 48909-8143, at the cost charged in this rule, plus $20.00 for shipping and handling. (5) The following Michigan Occupational Safety and Health (MIOSHA) standards are referenced in these rules. Up to 5 copies of these standards may be obtained at no charge from the Michigan Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services section, P.O. Box 30643, Lansing, MI, 48909-8143 or via the internet at website: www.michigan.gov/mioshastandards. For quantities greater than 5, the cost, at the time of adoption of these rules, is 4 cents per page. (a) Occupational Health Standard Part 380 “Occupational Noise Exposure in General Industry” R 325.60101 to R 325.30128. (b) Occupational Health Standard Part 451 “Respiratory Protection,” R 325.60051 to R 325.60052. (c) General Industry Safety and Health Standard Part 50 “Telecommunications,” R 408.15001 to R 408.15004. (d) General Industry Safety and Health Standard Part 86 “Electric Power Generation, Transmission, and Distribution,” R 408.18601 to R 408.18605. (6) The appendices are informational only and are not intended to create any additional obligations or requirements not otherwise imposed or to detract from any established obligations or requirements.