R 408.15275 Water log dumps.

Rule 5275 (1) Ungrounded electrically powered hoists using handheld remote control in grounded locations, such as log dumps or mill log lifts, shall be actuated by circuits operating at less than 50 volts to ground. (2) Roadbeds at log dumps shall be of sufficient width and evenness to ensure safe operation of equipment. (3) An adequate brow log or skid timbers or the equivalent shall be provided where necessary. Railroad-type dumps, when located where logs are dumped directly into water or where entire loads are lifted from a vehicle, may be exempted providing such practice does not create a hazardous exposure of personnel or equipment. (4) Unloading lines shall be arranged so that it is not necessary for the employees to attach them from the pond or dump side of the load except when entire loads are lifted from the log-transporting vehicle. (5) Unloading lines, crotch lines, or equally effective means shall be arranged and used in a manner to minimize the possibility of any log from swinging or rolling back. (6) When logs are unloaded with peavys or similar manual methods, means shall be provided and used that will minimize the danger from rolling or swinging logs. (7) Guardrails, walkways, and standard handrails shall be installed as prescribed in General Industry Safety and Health Standard Part 2 “Walking-Working Surfaces,” as referenced in R 408.15209. (8) An employer shall provide approved life rings with line attached and maintained to retain buoyancy.