R 408.17701a
R 408.17701a Scope, adoption, and availability of standards.
Cite as Mich. Admin. Code R 408.17701a
Rule 7701a. (1) These rules contain requirements for the control of grain dust fires
and explosions, and certain other safety hazards associated with grain handling facilities.
(2) The following federal Occupational Safety and Health Administration (OSHA)
regulations are adopted by reference in these rules:
(a) 29 CFR 1910.272 “Grain handling facilities,” as amended December 27, 2011.
(b) 29 CFR 1910.272, appendix A “Grain handling facilities,” as amended
November 7, 2002.
(c) 29 CFR 1910.272, appendix B “National consensus standards,” as in effect as of
the effective date of these rules.
(d) 29 CFR 1910.272, appendix C “References for further information,” as amended
March 8, 1996.
(e) 29 CFR 1910.165 “Employee alarm systems,” as amended September 12, 1980.
(f) 29 CFR part 1910, subpart L, appendix A “Fire Protection,” as amended May 1,
1981.
(g) 29 CFR part 1910, subpart L, appendix B “National Consensus Standards,” as
amended June 30, 1993.
(h) 29 CFR part 1910, subpart L, appendix C “Fire Protection references for further
information,” as amended June 30, 1993.
(i) 29 CFR part 1910, subpart L, appendix E “Test methods for protective clothing,”
as amended May 1, 1981.
(3) A reference to 29 CFR 1910.38 means General Industry Safety and Health
Standard Part 6. “Fire Exits.”
(4) A reference to 29 CFR 1910.134 means Occupational Health Standard Part 451.
“Respiratory Protection.”
(5) A reference to 29 CFR 1910.252 means both of the following:
(a) General Industry Safety Standard Part 12. “Welding and Cutting.”
(b) General Industry Safety and Health Standard Part 529. “Welding, Cutting, and
Brazing.”
(6) A reference to 29 CFR part 1910, subpart D means General Industry Safety and
Health Standard Part 2. “Walking-Working Surfaces.”
(7) A reference to 29 CFR part 1910, subpart Z means Occupational Health
Standard Part 301. “Air Contaminants for General Industry.”
(8) The adopted federal regulations have the same force and effect as a rule
promulgated under the Michigan occupational safety and health act, 1974 PA 154, MCL
408.1001 to 408.1094.
(9) The OSHA regulations adopted in these rules are available from the United
States Department of Labor, Occupational Safety and Health Administration website,
www.osha.gov, at no charge, as of the time of adoption of these rules.
(10) The regulations adopted in these rules are available for inspection at the
Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services Section,
530 West Allegan Street, P.O. Box 30643, Lansing, Michigan, 48909-8143.
(11) The regulations adopted in these rules may be obtained from the publisher or
the Department of Licensing and Regulatory Affairs, MIOSHA Regulatory Services
Section, 530 West Allegan Street, P.O. Box 30643, Lansing, Michigan, 48909-8143, at
the cost charged in this rule, plus $20.00 for shipping and handling.
(12) The following Michigan Occupational Safety and Health Administration
(MIOSHA) standards are referenced in these rules. Up to 5 copies of these standards
may be obtained at no charge from the Michigan Department of Licensing and
Regulatory Affairs, MIOSHA Regulatory Services Section, 530 West Allegan Street,
P.O. Box 30643, Lansing, Michigan, 48909-8143 or via the internet at the following
website: www.michigan.gov/mioshastandards. For quantities greater then 5, the cost, as
of the time of adoption of these rules, is 4 cents per page.
(a) General Industry Safety Standard Part 12. “Welding and Cutting,” R 408.11201
to R 408.11299.
(b) General Industry Safety and Health Standard Part 2. “Walking-Working
Surfaces,” R 408.10201 to R 408.10241.
(c) General Industry Safety and Health Standard Part 6. “Fire Exits,” R 408.10601 to
R 408.10697.
(d) Occupational Health Standard Part 301. “Air Contaminants for General
Industry,” R 325.51101 to R 325.51107.
(e) General Industry Safety and Health Standard Part 529. “Welding, Cutting, and
Brazing,” R 325.52901 to R 325.52931.
(f)
Occupational
Health
Standard
Part
451.
“Respiratory
Protection,”
R 325.60051 to R 325.60052.