R 408.18134 Dividers and depositors .

Rule 8134. (1) A guard at the front of a divider or depositor shall be constructed so that the dough weight can be adjusted without removal of the guard . (2) A guard at the back of a divider or depositor shall enclose all moving parts. The guard shall be hinged and interlocked with the power source so that the machine will not operate when the enclosure is open . (3) The oil hole for the knife at the back of a divider shall be of such size that a finger cannot enter the hold . (4) Any elongated hole in the knife actuating arm on a divider shall be covered with a saddle guard or other protective device . (5) Start and stop control buttons on a divider or depositor shall be oil-tight and other electrical components shall be either oil-tight or located to prevent the entrance of oil .