R 299.2433 Plugging instructions.

Rule 2433. (1) Except as provided in subrule (2) of this rule, the supervisor of mineral wells or authorized representative of the supervisor of mineral wells shall issue plugging instructions after receipt of notification as provided by R 299.2432. The plugging instructions shall specify all of the following information: (a) The type and amount of plugging material to be used. (b) The intended depths at which bridges are to be set. (c) The intended depths and lengths of cement plugs. (d) The intended amount of casing to be pulled. (e) Other requirements the supervisor of mineral wells determines are necessary for the proper plugging of the well. (2) The plugging procedure filed as required in R 299.2315(b) or R 299.2316(f) and approved by the supervisor of mineral wells shall serve as the plugging instructions for a test well.