R 299.2473 Metallic component standards.

Rule 2473. A permittee of a well shall ensure that metallic components installed during the course of drilling, completing, testing, producing, repair, rework, or servicing operations after the effective date of these rules, where applicable, are in compliance with or exceed the standards for use in a hydrogen sulfide environment set forth in the nace standard MR0175-2000, 2000 edition, entitled "Sulfide Stress Cracking Resistant Metallic Material for Oil Field Equipment," which is adopted by reference in these rules. Copies may be inspected at the Lansing Office or Field Offices of the Geological and Land Management Division of the Department of Environmental Quality. Copies may be obtained from the Michigan Department of Environmental Quality, Geological and Land Management Division, P.O. Box 30256, Lansing, Michigan 48909, at a cost as of the time of adoption of these rules of $50.00 each, and from the National Association of Corrosion Engineers, P.O. Box 218340, Houston, Texas 77218, at a cost as of the time of adoption of these rules of $50.00 each.