R 299.9220 Table 203a; hazardous waste from nonspecific sources.

Rule 220. Table 203a reads as follows: TABLE 203a EPA Hazardous Waste Number Hazardous Waste from Nonspecific Sources Hazard Code F001 The following spent halogenated solvents used in degreasing: tetrachloroethylene, trichloroethylene, methylene chloride, 1,1,1-trichloroethane, carbon tetrachloride, and chlorinated fluorocarbons; all spent solvent mixtures and blends used in degreasing containing, before use, a total of 10% or more, by volume, of 1 or more of the above halogenated solvents or those solvents listed in F002, F004, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. (T) F002 The following spent halogenated solvents: tetrachloroethylene, (T) TABLE 203a EPA Hazardous Waste Number Hazardous Waste from Nonspecific Sources Hazard Code methylene chloride, trichloroethylene, 1,1,1-trichloroethane, chlorobenzene, 1,1,2trichloro1,2,2trifluoroethane, ortho- dichlorobenzene, trichlorofluoromethane and 1,1,2 trichloroethane; all spent solvent mixtures and blends containing, before use, a total of 10% or more, by volume, of 1 or more of the above halogenated solvents or those solvents listed in F001, F004, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. F003 The following spent nonhalogenated solvents: xylene, acetone, ethyl acetate, ethyl benzene, ethyl ether, methyl isobutyl ketone, n-butyl alcohol, cyclohexanone, and methanol; all spent solvent mixtures and blends containing, before use, only the above spent nonhalogenated solvents; and all spent solvent mixtures or blends, containing before use, one or more of the above nonhalogenated solvents, and a total of 10% or more, by volume, of 1 or more of those solvents listed in F001, F002, F004, and F005 and still bottoms from the recovery of these spent solvents and spent solvent mixtures. (I) F004 The following spent nonhalogenated solvents: cresols and cresylic acid, and nitrobenzene; all spent solvent mixtures and blends containing, before use, a total of 10% or more, by volume, of 1 or more of the above nonhalogenated solvents or those solvents listed in F001, F002, and F005; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. (T) F005 The following spent nonhalogenated solvents: toluene, methyl ethyl ketone, carbon disulfide, isobutanol, pyridine, benzene, 2-ethoxyethanol, and 2nitropropane; all spent solvent mixtures and blends containing, before use, a total of 10% or more, by volume, of 1 or more of the above nonhalogenated solvents or those solvents listed in F001, F002 and F004; and still bottoms from the recovery of these spent solvents and spent solvent mixtures. (I, T) F006 Wastewater treatment sludges from electroplating operations except from the following processes: (1) sulfuric acid anodizing of aluminum; (2) tin plating on carbon steel; (3) zinc plating used on a segregated basis on carbon steel; (4) aluminum or zinc-aluminum plating on carbon steel; (5) cleaning or stripping associated with tin, zinc, and aluminum plating on carbon steel; and (6) chemical etching and milling of aluminum. (T) F007 Spent cyanide plating bath solutions from electroplating (R, T) TABLE 203a EPA Hazardous Waste Number Hazardous Waste from Nonspecific Sources Hazard Code operations. F008 Plating sludges from the bottom of plating baths from electroplating operations where cyanides are used in the process. (R, T) F009 Spent stripping and cleaning bath solutions from electroplating operations where cyanides are used in the process. (R, T) F010 Quenching bath residues from oil baths from metal heat treating operations where cyanides are used in the process. (R, T) F011 Spent cyanide solutions from salt bath pot cleaning from metal heat-treating operations. (R, T) F012 Quenching wastewater treatment sludges from metal heat-treating operations where cyanides are used in the process. (T) F019 Wastewater treatment sludges from the chemical conversion coating of aluminum except from zirconium phosphating in aluminum can washing when the phosphating is an exclusive conversion coating process. Wastewater treatment sludges from the manufacturing of motor vehicles using a zinc phosphating process will not be subject to this listing at the point of generation if both of the following requirements are met: (1) the wastes are not placed outside on the land before shipment to a landfill for disposal and are either disposed of in a solid waste landfill unit that is permitted or licensed under part 115; disposed in a hazardous waste landfill meeting the requirements of the act and these rules; or, if out-of-state, disposed of in a RCRA, Subtitle D, 42 USC 6941 to 6949a, municipal or industrial landfill unit that is equipped with a single clay liner and is permitted, licensed, or otherwise authorized by the receiving state; or disposed of in a landfill subject to, or otherwise meeting, the requirements of 40 CFR 258.40, 264.301, or 265.301, and (2) the generator maintains records to prove that the exempted sludges meet the conditions of the listing, including: the volume of waste generated and disposed off-site; the date the waste was generated, the date the waste was sent off-site, the name and address of receiving facility, and documentation confirming receipt. For this listing, motor vehicle manufacturing means the engagement in the manufacture of complete automobiles and light trucks/utility vehicles or chassis only. (T) F020 Wastes, except wastewater and spent carbon from hydrogen chloride purification, from the production or manufacturing use as a reactant, chemical intermediate, or component in a (H) TABLE 203a EPA Hazardous Waste Number Hazardous Waste from Nonspecific Sources Hazard Code formulating process, of tri or tetrachlorophenol or of intermediates used to produce their pesticide derivatives. This listing does not include wastes from the production of hexachlorophene from highly purified 2,4,5trichlorophenol. F021 Wastes, except wastewater and spent carbon from hydrogen chloride purification, from the production or manufacturing use as a reactant, chemical intermediate, or component in a formulating process of pentachlorophenol or of intermediates used to produce its derivatives. (H) F022 Wastes, except wastewater and spent carbon from hydrogen chloride purification, from the manufacturing use as a reactant, chemical intermediate, or component in a formulating process of tetra, penta, or hexachlorobenzenes under alkaline conditions. (H) F023 Wastes, except wastewater and spent carbon from hydrogen chloride purification, from the production of materials on equipment previously used for the production or manufacturing use as a reactant, chemical intermediate, or component in a formulating process of tri and tetrachlorophenols. This listing does not include wastes from equipment used only for the production or use of hexachlorophene from highly purified 2,4,5trichlorophenol. (H) F024 Process wastes, including, but not limited to, distillation residues, heavy ends, tars, and reactor cleanout wastes from the production of certain chlorinated aliphatic hydrocarbons by free radical catalyzed processes. These chlorinated aliphatic hydrocarbons are those having carbon chain lengths ranging from 1 to 5, with varying amounts and positions of chlorine substitutions. This listing does not include wastewater, wastewater treatment sludges, spent catalysts, and wastes listed in R 299.9213(1)(a) or R 299.9214(1)(a). (T) F025 Condensed light ends, spent filters and filter acids, and spent desiccant wastes from the production of certain chlorinated aliphatic hydrocarbons, by free radical catalyzed processes. These chlorinated aliphatic hydrocarbons are those having carbon chain lengths ranging from 1 to 5, with varying amounts and positions of chlorine substitution. (T) F026 Wastes, except wastewater and spent carbon from hydrogen chloride purification, from the production of materials on equipment previously used for the manufacturing use as a reactant, chemical intermediate, or component in a formulating (H) TABLE 203a EPA Hazardous Waste Number Hazardous Waste from Nonspecific Sources Hazard Code process of tetra, penta, or hexachlorobenzene under alkaline conditions. F027 Discarded unused formulations containing tri, tetra, or pentachlorophenol or discarded unused formulation containing compounds derived from these chlorophenols. This listing does not include formulations containing hexachlorophene synthesized from prepurified 2,4,5trichlorophenol as the sole component. (H) F028 Residues resulting from the incineration or thermal treatment of soil contaminated with EPA hazardous waste numbers F020, F021, F022, F023, F026, and F027. (T) F032 Wastewaters, except for those that have not come into contact with process contaminants; process residuals; preservative drippage; and spent formulations from wood preserving processes generated at plants that currently use or have previously used chlorophenolic formulations, except potentially cross-contaminated wastes that have had the F032 hazardous waste number deleted pursuant to 40 CFR 261.35 or potentially cross-contaminated wastes that are otherwise currently regulated as F034 or F035, and where the generator does not resume or initiate the use of chlorophenolic formulations. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote or pentachlorophenol, or both. (T) F034 Wastewaters, except for those that have not come into contact with process contaminants; process residuals; preservative drippage; and spent formulations from wood preserving processes generated at plants that use creosote formulations. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote or pentachlorophenol, or both. (T) F035 Wastewaters, except for those that have not come into contact with process contaminants; process residuals; preservative drippage; and spent formulations from wood preserving processes generated at plants that use inorganic preservatives containing arsenic or chromium. This listing does not include K001 bottom sediment sludge from the treatment of wastewater from wood preserving processes that use creosote or pentachlorophenol, or both. (T) TABLE 203a EPA Hazardous Waste Number Hazardous Waste from Nonspecific Sources Hazard Code F037 Petroleum refinery primary oil/water/solids (oil and/or water and/or solids) separation sludge, any. sludge generated from the gravitational separation of oil/water/solids during the storage or treatment of process wastewaters and oily cooling wastewaters from petroleum refineries. These sludges include, but are not limited to, those generated in oil/water/solids separators; tanks and impoundments; ditches and other conveyances; sumps; and stormwater units receiving dry weather flow. Sludges generated in stormwater units that do not receive dry weather flow, sludges generated from noncontact once-through cooling waters segregated for treatment from other process or oily cooling waters, sludges generated in aggressive biological treatment units as defined in R 299.9213(4), including sludges generated in 1 or more additional units after wastewaters have been treated in aggressive biological treatment units, and K051 wastes are not included in this listing. This listing does include residuals generated from processing or recycling oil-bearing hazardous secondary materials excluded under R 299.204(1)(l) if those residuals are being disposed. (T) F038 Petroleum refinery secondary (emulsified) oil/water/solids (oil and/or water and/or solids) separation sludge-any sludge or float generated from the physical or chemical separation of oil/water/solids in process wastewaters and oily cooling wastewaters from petroleum refineries. These wastes include, but are not limited to, all sludges and floats generated in induced air flotation (IAF) units and tanks and impoundments, and all sludges generated in DAF units. Sludges generated in stormwater units that do not receive dry weather flow; sludges generated from non-contact once-through cooling waters segregated for treatment from other process or oily cooling waters; sludges and floats generated in aggressive biological treatment units as defined in R 299.9213(4), including sludges and floats generated in 1 or more additional units after wastewaters have been treated in aggressive biological treatment units; and F037, K048, and K051 wastes are not included in this listing. (T) F039 Leachate resulting from the treatment, storage, or disposal of wastes classified by more than 1 hazardous waste number pursuant to R 299.9213 and R 299.9214 or from a mixture of wastes classified pursuant to R 299.9213 and R 299.9214. Leachate resulting from the management of 1 or more of the (T) TABLE 203a EPA Hazardous Waste Number Hazardous Waste from Nonspecific Sources Hazard Code following hazardous wastes, and no other hazardous wastes, retains its original hazardous waste number or numbers: F020, F021, F022, F023, F026, F027, or F028. Editor's Note: An obvious error in R 299.9220 was corrected at the request of the promulgating agency, pursuant to Section 56 of 1969 PA 306, as amended by 2000 PA 262, MCL 24.256. The rule containing the error was published in Michigan Register, 2025 MR 8. The memorandum requesting the correction was published in Michigan Register, 2025 MR 13.