R 323.2230
R 323.2230 Treatment system requirements.
Cite as Mich. Admin. Code R 323.2230
Rule 2230. A treatment system described in R 323.2216(3) shall be in
compliance with all of the following requirements:
(a) The treatment system shall have sufficient hydraulic capacity to treat organic or
inorganic loading so that the discharge receives physical, chemical, biological
treatment or a combination of treatments to meet the standards of R 323.2222.
Subsequent to construction of treatment facilities built under this rule, a discharger shall
obtain certification by an engineer licensed under Act No. 299 of the Public Acts of
1980, as amended, being ?339.101 et seq. of the Michigan Compiled Laws, and known
as the occupational code, that the treatment system complies with this requirement.
The certification shall be available for inspection by the department.
(b) Wastewater sludge shall be disposed of in accordance with part 115 or land
applied in accordance with applicable state and federal law.
(c) Operation of the treatment system shall be under the supervision of an operator
certified pursuant to section 3110(1) of the act for an industrial or commercial entity or
section 4104 of the act for a sewage treatment works operated by a municipality.
(d) A discharger shall maintain all treatment or control facilities or systems
installed or used by the discharger to achieve compliance with this rule in good
working order and operate the facilities or systems as efficiently as possible.
(e) A discharger shall have an operation and maintenance manual for the
wastewater treatment facility. The manual shall be used by the certified operator of the
facility as a guide for facility operation and maintenance. The operation and
maintenance manual shall include all of the following information:
(i) The function, start-up, shutdown, and periodic maintenance procedures for each
unit process and item of mechanical and electrical equipment.
(ii) The appropriate response or facility adjustment to minimize the impact of an
emergency situation so as to facilitate rapid implementation of a correct response during
emergencies.
(iii) A monitoring program to monitor process efficiency.
(iv) The details of how inspections will be conducted and a schedule for the
inspection of collection system and pump stations, where applicable.
(v) The periodic maintenance procedures for the collection system and pump
stations, where applicable.
(vi) Procedures for the routine maintenance and inspection of lagoons and
equipment used for irrigation, where applicable.