FINAL PERMIT APPLICATION INFORMATION REQUIREMENTS FOR TRANSFER FACILITIES

The application for a transfer facility permit must include the following information in addition to the information required by part 7001.3300 : A. detailed plans and an engineering report specifying how the facility will be constructed and operated including: (1) the facility design and layout; (2) security measures; (3) the types of vehicles intended for use at the site; (4) the types of wastes that will be received; (5) the hours of operation; (6) the storage capacity at the facility and the maximum amount expected to be stored; (7) a description of all major equipment, such as compactors, conveyors, and front-end loaders, used at the site, including the function, the model, the capacity, and the number of each type of equipment; (8) the methods to be employed to control nuisances such as dust, vectors, litter, noise, and odors; (9) the frequency of waste removal and method of removal; (10) the ultimate deposition of the waste received at the facility; (11) the on-site road design and maintenance; (12) the site closure plan; (13) the operating procedures to ensure the facility is maintained in compliance with part 7035.2870 ; (14) any recycling or composting to be done at the site and how it will be conducted; and (15) the safety and emergency procedures for the site operators; B. information demonstrating that the facility will meet the design standards in part 7035.2870 , subpart 4, or that the facility qualifies under part 7035.2870 , subpart 3, and information demonstrating that the facility will meet the operations standard in part 7035.2870 , subpart 5; and C. evidence that the owner and operator have obtained all necessary municipality approvals. The owner or operator must submit a copy of any approvals obtained. If the facility is located in an area where no municipality approval is required, the owner or operator shall submit a signed written statement indicating that no municipality approval is required.