PERFORMANCE STANDARDS FOR CLASS II WASTE COMBUSTORS

Subpart 1. Scope. The owner or operator of a class II waste combustor must comply with: A. the emission limits, notification, monitoring, testing, record-keeping, and reporting requirements of the new source performance standards incorporated in part 7011.1293 ; B. subpart 2; and C. the following requirements: (1) parts 7011.1240 , subpart 1; 7011.1281 ; 7011.1282 ; 7011.1283 ; and 7011.1284 if the owner or operator chooses to comply with the operator certification requirements of Code of Federal Regulations, title 40, section 60.54b, as amended, by obtaining certification through the agency; (2) the general waste combustor facility requirements under part 7011.1245 ; (3) the industrial solid waste management plan requirements under part 7011.1250 ; (4) the reporting and response requirements for exceeding continuously monitored emissions under part 7011.1260 , subpart 7; (5) the reporting and response requirements under part 7011.1265 , subpart 11, if an exceedance is measured during the conduct of a performance test; and (6) the testing or monitoring frequency for a waste composition study according to part 7011.1270 , subpart 6. Subp. 2. Emission limits. The table in this subpart governs emission limitations for a class II waste combustor. For acid gas limitations, either the applicable percent reduction or the parts per million by volume emission limitation, whichever is less stringent, is the emission limitation for the waste combustor. Size Class II Particulate matter Filterable 0.015 gr/dscf The sum of filterable and organic condensable 0.020 gr/dscf PCDD/PCDF (total) 30 ng/dscm Acid gases HCl 90% control or 25 ppm SO 2 80% control or 30 ppm Carbon monoxide Modular 50 ppm Mass burn or fluidized bed 100 ppm RDF stoker 150 ppm Opacity 10% NO x NA Mercury (short-term) Modular 100 µg/dscm or 85% removal Mass Burn 100 µg/dscm or 85% removal RDF (90-day test interval) 50 µg/dscm or 85% removal FBC 100 µg/dscm or 85% removal Mercury (long-term) Modular 60 µg/dscm or 85% removal Mass burn 60 µg/dscm or 85% removal RDF (90-day test interval) 30 µg/dscm or 85% removal FBC 60 µg/dscm or 85% removal RDF (12-month test interval) 30 µg/dscm or 85% removal