Closure Plan and Inspection-Maintenance Plan—General Requirements

PURPOSE: This rule describes general requirements and guidelines for obtaining an approved Metallic Minerals Waste Management Area Permit and the relationship of this permit to the requirements of other environmental programs. (1) Consistent with sections 444.362 and 444.365, RSMo, the requirements of applicable state environmental programs and permits shall be included in the closure and inspection-maintenance plans. Compliance with these requirements will be considered a condition of the Metallic Minerals Waste Management Permit. Existing environmental programs, permits, statutes, and rules include, but are not limited to: (A) The Water Protection Program’s— 1. National Pollutant Discharge Elimination System (NPDES) Permit, Chapter 644, RSMo and 10 CSR 20-6.010; 2. 401/404 approvals, Federal Clean Water Act and section 401, RSMo; 3. Land application letters of approval Chapter 644, RSMo; and 4. Underground Injection Control (UIC) Permit, Chapters 577 and 644, RSMo, 10 CSR 20-6.070, and 10 CSR 20-6.090; (B) The Missouri Geological Survey’s Dam and Reservoir Safety— 1. Registration Permit, section 236.440, RSMo and 10 CSR 22-3.030; 2. Construction Permit, section 236.435, RSMo and 10 CSR 22-3.040; and 3. Safety Permit, section 236.440, RSMo and 10 CSR 22-3.050; (C) The Solid Waste Management Program’s— 1. Solid Waste Disposal Area Permit, sections 260.200—260.245, RSMo and 10 CSR 80-1.010—10 CSR 80-4.010; 2. Solid Waste Processing Facility Permit, sections 260.200–260.245, RSMo, 10 CSR 80-1.010, 10 CSR 80-2.020, and 10 CSR 80-5.010; and 3. Waste Tire Requirements, section 206.200–206.345, RSMo and 10 CSR 808.020–10 CSR 80-8.060; (D) The Air Pollution Control Program’s— 1. Major and Minor Source Permits, section 643.075, RSMo and 10 CSR 106.060; 2. De minimis Permit, section 643.075, RSMo and 10 CSR 10-6.060; and 3. Open Burning Permit, Chapter 643, RSMo and 10 CSR 10-2.100, 10 CSR 103.030, 10 CSR 10-4.090, 10 CSR 10-5.070, and 10 CSR 10-6.060; (E) The Public Drinking Water Branch’s permit to construct and permit to dispense drinking water, sections 640.110.1 and 640.115, RSMo and 10 CSR 60-10.010 and 10 CSR 60-3.010; (F) The Land Reclamation Program’s permit to engage in surface mining and sections 444.500—444.786, RSMo; and (G) The Hazardous Waste Program’s— 1. Hazardous Waste Generator Notification Requirements, section 260.380, RSMo and 10 CSR 25-5; 2. Hazardous Waste Resource Recovery Certification, section 260.350–260.434, RSMo and 10 CSR 25-9; and 3. Hazardous Waste Facility Permit, section 260.350, RSMo and 10 CSR 25. (2) If it is determined that existing environmental laws and regulations are not adequate to achieve the objectives of the closure and inspection-maintenance plans, the director may establish additional permit conditions as may be necessary to achieve those objectives, taking cost, benefit, and technical feasibility into account. (3) The definitions, provisions, and guidelines in 10 CSR 45 shall be used with and, in case of conflict, shall take precedence over other regulations listed in section (1) of this rule. AUTHORITY: section 444.380, RSMo 2016.* Original rule filed Oct. 2, 1990, effective April 29, 1991. Amended: Filed Jan. 19, 2000, effective Sept. 30, 2000. Amended: Filed March 26, 2018, effective Nov. 30, 2018. *Original authority: 444.380, RSMo 1989, amended 1993, 1995.