Emissions Evaluation Report

Emissions Evaluation Report. Where emissions evaluation reporting is required in any permit, acceptable mathematical methods to demonstrate control adequacy shall include but not be limited to the following: A. an emission inventory including: (1) location and description of control equipment at each point source; (2) determination of all possible pollutants at each point source (characteristics, conditions, particle size distribution, etc.); (3) listing of all stack parameters at each point of emission, and (4) detailed description of input material (e.g., percent sulfur content, percent moisture, average BTU heating value, input rate, etc.); and B. a detailed engineering report including: (1) sufficient calculations to demonstrate uncontrolled emissions; (2) sufficient calculations to support or show design efficiency of control equipment; (3) sufficient calculations to demonstrate controlled emissions; and (4) comparison of calculated controlled emissions with the applicable emission standards as set forth in Commission Regulation Miss. Admin. Code, Title 11, Part 2, Chapter 1.