ARM 42.21.140. OIL DRILLING RIGS

(1) Bids for new rigs will be solicited from manufacturers of oil drilling rigs to determine current replacement costs based on the depth rating listed below. For each depth rating listed below for oil drilling rigs, there will be two replacement cost categories. One category will represent current replacement cost of a mechanical rig and the second category will represent current replacement cost of an electric rig. Each rig as it is assessed will be placed in a value category based on its depth. DEPTH CATEGORIES Class Depth Capacity 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 3,000 ft. 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,001 ft. to 5,000 ft. 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . 5,001 ft. to 8,000 ft. 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . 7,501 ft. to 10,000 ft. 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . 10,001 ft. to 12,500 ft. 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . 12,501 ft. to 15,000 ft. 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . 15,001 ft. to 20,000 ft. 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . 20,001 ft. and over (2) The department shall prepare a ten-year trended depreciation schedule for oil drilling rigs. The trended depreciation schedule shall be derived from depreciation factors published by Marshall and Swift Publication Company. The "% good" for all drill rigs less than one year old shall be 100 percent. The trended depreciation schedule for tax year 2012 is listed below. DRILL RIG TRENDED DEPRECIATION SCHEDULE YEAR NEW/ ACQUIRED % GOOD TREND FACTOR TRENDED % GOOD 2012 100% 1.000 100% 2011 92% 1.000 92% 2010 84% 1.021 86% 2009 76% 1.006 76% 2008 67% 1.042 70% 2007 58% 1.089 63% 2006 49% 1.153 57% 2005 39% 1.211 47% 2004 30% 1.314 39% 2003 24% 1.360 33% 2002 and older 20% 1.387 28% (3) In any year that the information required in (1) is not available for use by the department, oil drilling rigs shall be valued by using the previous year's schedule. (4) This rule is effective for tax years beginning after December 31, 2011. MANUFACTURER'S DEPTH RATING ELECTRICAL RIG R.C.N MECHANICAL RIG R.C.N 0 - 3,000 ft. $ $ 285,209 3,001 ft. - 5,000 ft. 432,135 5,001 ft. - 7,500 ft. 868,250 654,750 7,501 ft. - 10,000 ft. 1,167,210 998,750 10,001 ft. - 12,500 ft. 1,265,500 1,130,600 12,501 ft. - 15,000 ft. 1,720,400 1,538,500 15,001 ft. - 20,000 ft. 1,990,100 20,001 ft. and over 2,036,047 The depth capacity for drilling rigs will be based on the "Manufacturers Depth Rating." These replacement costs will then be depreciated to arrive at market value according to the schedule mentioned in (2).