Dilution prohibited as a substitute for treatment

1. Except as provided in subsection 2, no generator, transporter, handler, or owner or operator of a treatment, storage, or disposal facility shall in any way dilute a restricted waste or the residual from treatment of a restricted waste as a substitute for adequate treatment to achieve compliance with sections 33.1-24-05-280 through 33.1-24-05-289, to circumvent the effective date of a prohibition in sections 33.1-24-05-266 through 33.1-24-05-279, to otherwise avoid a prohibition in sections 33.1-24-05-266 through 33.1-24-05-279, or to circumvent a land disposal prohibition imposed by Resource Conservation and Recovery Act section 3004. 2. Dilution of wastes that are hazardous only because they exhibit a characteristic in treatment systems which include land-based units which treat wastes subsequently discharged to a water of the United States pursuant to a permit issued under section 402 of the Clean Water Act, or which treat wastes in a Clean Water Act-equivalent treatment system, or which treat wastes for the purposes of pretreatment requirements under section 307 of the Clean Water Act is not impermissible dilution for purposes of this section unless a method other than deactivation to remove the hazardous characteristic has been specified in section 33.1-24-05-280 as the treatment standard, or unless the waste is a D003 reactive cyanide wastewater or nonwastewater. 3. Combustion of the hazardous waste codes listed in appendix XXIX is prohibited, unless the waste, at the point of generation, or after any bona fide treatment such as cyanide destruction prior to combustion, can be demonstrated to comply with one or more of the following criteria, unless otherwise specifically prohibited from combustion: a. The waste contains hazardous organic constituents or cyanide at levels exceeding the constituent-specific treatment standard specified in section 33.1-24-05-288; b. The waste consists of organic, debris-like materials (for example, wood, paper, plastic, or cloth) contaminated with an inorganic metal-bearing hazardous waste; c. The waste, at point of generation, has reasonable heating value such as greater than or equal to five thousand British thermal units per pound; d. The waste is cogenerated with wastes for which combustion is a required method of treatment; e. The waste is subject to requirements necessitating reduction of organics, including biological agents; or f. The waste contains greater than one percent total organic carbon. 4. It is a form of impermissible dilution, and therefore prohibited, to add iron filings or other metallic forms of iron to lead-containing hazardous wastes in order to achieve any land disposal restriction treatment standard for lead. Lead-containing wastes include D008 wastes (wastes exhibiting a characteristic due to the presence of lead), all characteristic wastes containing lead as an underlying hazardous constituent, listed wastes containing lead as a regulated constituent, and hazardous media containing any of the aforementioned lead-containing wastes.