Duties of the operator

1. Use only tanning equipment manufactured and certified to comply with 21 CFR part 1040, section 1040.20, "sunlamp products and ultraviolet lamps intended for use in sunlamp products", in tanning facilities. Compliance shall be based on the standard in effect at the time of manufacture as shown on the device identification label required by 21 CFR part 1010 section 1010.3. 2. Use only tanning equipment that has a timer which complies with the requirements of 21 CFR part 1040, section 1040.20(c)(2). The timer shall be incorporated in the tanning device. The maximum timer interval shall not exceed the manufacturer's maximum recommended exposure time. 3. Ensure that protective acrylic sheets are in place when a tanning device is in use, except that the protect acrylic may be sleeves over the lamps in the upper portion of a device or over lamps in booth devices.