Reglamento General de Seguridad e Higiene Industrial, Cap. VI -- Montacargas de Trabajadores. No incluido en el índice bajo la Ley Núm. 149 de 12 dic, 2005

Oil buffers shall be approved by the enforcing authority subject to the following: 1. The buffer shall be approved on the basis of the engineering tests specified in Part IX, Section 902, made by a qualified testing laboratory, or by the manufacturer and withessed by a representative of such a qualified testing laboratory. Test shall be made on a buffer of each type or design to be approved and having the following portings: a. The porting having the range of the maximum loads for which the buffer is designed. b. The porting having the range of the minimum loads for which the buffer is designed. The firm or person installing the buffer shall submit to the enforcing authority an authentic copy of the best certificate conforming to the requirements of Part IX, Section 902, Rule 902.5f. 2. Upon receipt of an authentic copy of the test certificate stating that the buffer tested has met the specified test requirements, the enforcing authority shall approve the use of such buffers. Oil buffers tested in accordance with the test requirements of prior editions of this code shall be acceptable without being re-tested, on submittal by the person or firm installing the buffers of the test certificate stating that the buffer when tested met the specified test requirements of that edition of the code. 120 TEXTO EN ESPAÑOL USAS, A17.1