Reglamento General de Seguridad e Higiene Industrial, Cap. VI -- Montacargas de Trabajadores. No incluido en el índice bajo la Ley Núm. 149 de 12 dic, 2005

appreciable deformation of the rope. g. The installation of the device shall not reduce the required overhead clearances. h. The car-frame supports for the fastening members of the device shall conform to Part II, Section 203.13. Exception: Where existing conditions will not permit compliance with this requirement, other means of fastening may be used subject to the approval of the enforcing authority. i. Each device shall be permanently marked with the name of the manufacturer by means of metal tags or plates with the following data of the wire rope for which they are designed to be used: 1. Diameter of the rope inches. 2. Manufacturer's rated breaking strength of the rope. 3. Construction classification of the wire rope. The material and marking of the tags or plates shall conform to the requirements of Section 207,