Reglamento General de Seguridad e Higiene Industrial, Cap. VI -- Montacargas de Trabajadores. No incluido en el índice bajo la Ley Núm. 149 de 12 dic, 2005

(1/2) inch nor less than one-eighth and free from cutting edges. 4. The diameter (d) of the hole at the large en of the tapered portion of the socket shall be not less than two and one-quarter (2-1/4) times nor more then three (3) times the diameter of the wire rope used. 5. The diameter (d') of the hole at the small end of the tapered portion of the socket shall be not more than shown in Table No. 212.9d. di d SEE NOTE L" L L' Fig. 212.9d - Tapered Babbitted Rope Sockets Note: Rope socket and shackle rod may be in one piece, as shown, (Unit Construction) or the socket and rod may be separate. (See Rule 212.9c) TABLE NO. 212.9d Table 212.9d Relation of Rope Diameter to Small Diameter of Socket Nominal Rope Diameter in Inches Maximum Diameter of Hole 1/2 to 3/4 inclusive 3/32" larger than Nominal Rope Diameter 7/8 to 1-1/8 inclusive 1/8" larger than Nominal Rope Diameter 1-1/4 to 1-1/2 inclusive 3/16" larger than Nominal Rope Diameter -134- TEXTO EN ESPAÑOL USAS, A17.1 (3) El largo cilíndrico recto (L") en el extremo