510-RICR-00-00-12. RISBC-12 New Materials, Devices or Methods of Construction (version Periodic Refile, 12/19/2001 to 12/19/2001)

RHODE ISLAND STATE BUILDING CODE New Materials, Devices or Methods of Construction Regulation SBC-12 April 1, 1998 Replaces Regulation SBC-13-81 Revised November 1, 1981 STATE OF RHODE ISLAND AND PROVIDENCE PLANTATIONS Department of Administration Division of Central Services BUILDING CODE STANDARDS COMMITTEE One Capitol Hill Providence RI 02908 (401)222-3033 NEW MATERIALS, DEVICES OR SBC-12 METHODS OF CONSTRUCTION SUPPORTING STATEMENT This proposed regulation controls the approval process for new materials and methods of construction with the State of Rhode Island. Former amendments to said regulation remain in effect unless deletions or corrections are made herein. The Committee has amended these provisions in order to maintain criteria more suitable to Rhode Island health, safety and welfare standards. Particular changes incorporated in these proposed regulations by the Committee are delineated as follows: Section 1.1, Title: This section was amended to clarify the Committee’s authoritative provisions in approving new products. Section 1.3, Applicants: This section clarified the state’s position in accepting model code approval or evaluation reports. Also in order to encourage reciprocity, the Commissioner may issue a letter of acceptability for said approval. SBC12-1 STATE BUILDING CODE STANDARDS COMMITTEE RULES AND REGULATIONS FOR NEW MATERIALS, DEVICES OR NEW METHODS OF CONSTRUCTION SBC-12 PART 1 GENERAL SECTION 1 ADMINSTRATION 1.1 TITLE As authorized by Chapter 27.3 of the General Laws of Rhode Island 1956 as amended, and in accordance with 23-27.3-108.1.3, 23-27.3 – 109.1 and 23-27.3-127.1 of the State Building Code, the Building Code Standards Committee has promulgated the following Rules and Regulations for the approval of new materials, devices or methods of construction. 1.2 DEFINITIONS Unless otherwise expressly stated in the State Building Code, the following terms shall, for the purpose of these Rules and Regulations, have the meaning indicated in this Section. CODE – Rhode Island State Building Code COMMISSION – Commissioner’s staff COMMISSIONER – State Building Commissioner COMMITTEE – State Building Code Committee MATERIALS, DEVICES OR METHODS OF CONSTRUCTION – Any product, component, sub-system or other system designed for use in or as part of a building or structure, which may include décor, structural, electrical, mechanical, plumbing and fire protection systems, and other systems affecting health, safety and welfare. 1.3 APPLICANTS After July 1, 1979 all manufacturers of new materials, devices or methods of construction shall submit an application to the Commissioner for review. New materials devices or methods of construction which have valid current approval or evaluation reports issued by Model Code Agencies or other approved agencies, shall be reviewed by the Commission for determination of conformance with the Rhode Island State Building Code. The Commissioner may issue a letter of acceptability based on reciprocity if in his opinion no unusual or different conditions exist in the State of Rhode Island. All other applications for approval will be forwarded to the Committee for their approval with the Commissioner’s comments therein. SBC-88 SBC12-2 1.4 APPLICATION FEE All applications for approval of new materials, devices or methods of construction shall be accompanied by the registration fee indicated below. Initial Approvals $100.00 Annual Renewal of Approval $15.00 Letter of Acceptability on No Fee Model Code Reciprocity Ninety (90) days prior to the expiration of any Rhode Island Approval, the Commissioner shall notify the holder of such approval that renewal is required. 1.5 RESUBMISSIONS Modifications to any previously approved materials, devices or methods of construction shall require a resubmission of the application and registration fee to the Commissioner for Committee approval. 1.6 PENALTIES Any person who fails to comply with the requirements of these Rules and Regulations or who files a false report shall be subject to the penalties and actions prescribed in Section 122.3 of the State Building Code. SECTION 2 – REVOCATION AND SUSPENSION PROCEDURES 2.1 REVOCATON AND SUSPENSION The Commissioner may suspend or revoke the approval of any such material, device or method of construction approved in accordance with these Rules and Regulations, the State Building Code or approved standards of good practice. Notice of suspension or revocation of such approval shall be in writing with the reasons for suspension or revocation clearly set forth therein and served in accordance with Section 122.12 of the State Building Code. 2.2 NOTICE AND APPEALS Prior to suspension or revocation of the approval of any such material, device or method of construction, written notice of such intent shall be served by the Commissioner in accordance with Section 122.12 of the State Building Code. Within ten (10) calendar days of receipt of such notice, the affected manufacturer may appeal the suspension or revocation to the State Board of Standards and Appeals in accordance with the provisions of Section 127.1 of the State Building Code. SBC12-3 SBC-88 STATE OF RHODE ISLAND AND PROVIDENCE PLANTATIONS Department of Administration Report No.______________ Division of Central Services BUILDING CODE STANDARDS COMMITTEE Fee____________________ One Capitol Hill Providence RI 02908 Date Received___________ (401)222-3033 Application is hereby made for approval of the material, device or method of construction hereinafter described for use in the State of Rhode Island under the provisions of the State Building Code. 1. Corporate name and address of manufacturer____________________________ ___________________________________________________________________ 2. Name of product (material or device) __________________________________ ___________________________________________________________________ 2A. Identify method of construction___________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ 3. Specify model, type of size, if any_____________________________________ ___________________________________________________________________ 4. General description of product________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ 5. Use for which approval is requested: (include limitations, if any, expected in building type, location, or method of installation. See code tables 214 and 305). __________________________________________________________________ SBC-1200-88 6. History of Product, Material, Device or Method of Construction: (first public use, current annual quantity supplies, location of existing installation, etc.) _________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ ___________________________________________________________________ 7. Current Evaluation Reports in force: *(BOCA, SBCC, IBCO, etc.) Agency Approval Date Approval No. _____________ ______________ ____________________ _____________ ______________ _____________________ _____________ ______________ _____________________ _____________ ______________ _____________________ _____________ ______________ _____________________ _____________ ______________ ______________________ *Building Officials and Code Administrators International, Inc., Southern Building Code Congress, International Conference of Building Officials. 7A. Approval limitations, if any______________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ SBC-1200-88 8. Current state approvals in force: (and/or municipalities) Jurisdiction Approval Date Approval No. _____________ ______________ _________________________ _____________ ______________ _________________________ _____________ ______________ _________________________ _____________ ______________ _________________________ 9. Test(s) performed: **(UL, UST, FM, etc.) Testing Agency Date Type of Test _______________ _____________ _________________________ _______________ _____________ _________________________ _______________ _____________ _________________________ _______________ _____________ _________________________ _______________ _____________ _________________________ **Underwriters’ Laboratories, United States Testing, Factory Mutual __________________________________ Authorized Representative Title______________________________ Firm______________________________ Address___________________________ __________________________________ Tel. No.____________________________ ___________________ Date of Submission NOTE: Please submit three (3) copies of completed application plus one complete preliminary set of all relevant documentation and approvals. These forms may be xeroxed as required. SBC-1200-88