1680-02-04-.09
Screening Materials
Cite as Tenn. Comp. R. & Regs. 1680-02-04-.09
(1)
The materials listed below are hereby defined by the Department as being suitable for junkyard
screening and shall be used for the construction of barriers for screening purposes:
(a)
Wood Fences constructed of:
1.
Pressure treated, kiln dried, 1”x6” board; the surface may be painted, stained, or allowed
to weather naturally.
2.
Standard plywood, 5/8 inch B-C exterior grade, or 3/4 inch A-C exterior grade, pressure
treated; the surface must be painted.
3.
TI-11 textured exterior grade plywood siding, 5/8 inch, pressure treated, grooved; the
surface must be painted or stained.
RULES AND REGULATIONS FOR JUNKYARD CONTROL
CHAPTER 1680-2-4
(c)
Metal panel fences constructed of:
1.
Solid panels or corrugated or ribbed galvanized steel siding 29 gauge or heavier; the
surface may be unpainted or painted (after aging), or factory coated with an enamel
paint.
(d)
Double slatted chain link fences using aluminum or fiberglass slats as follows:
1.
Diagonal slatting front and back.
2.
Vertically slatted front and diagonally slatted back.
3.
Horizontally slatted front and diagonally slatted back.
(e)
Earth mounds or berms shaped and seeded for a natural appearance.
(2)
The materials used must form a structurally sound barrier which is neat, orderly and uniform in
appearance.
(3)
All structural barriers erected for screening purposes must be constructed of rigid materials and must
be permanently affixed to the ground.
(4)
All wood members are to be pressure treated.
(5)
The color of the material used for the face of a structural barrier, including paint applied to the
material after installation, shall be unobtrusive and compatible with the highway environs. Where a
wood surface is to be stained, the stain used shall be a wood tone which simulates the colors of
natural woods.
(6)
Damaged, dilapidated, or rusted materials, or a patch-work of various materials shall not be suitable
for screening purposes.
(7)
Other materials may be approved by the Department as being suitable for screening purposes upon
submission of detailed specifications for the materials to he used.
(8)
Those screens in existence prior to the effective date of these rules which provide effective
concealment and which are constructed of materials other than those herein defined as suitable for
screening purposes, may lawfully remain. Should it become necessary to replace the screen, the new
screen must be constructed of materials defined or otherwise approved by the Department as being
suitable for screening purposes.