R156-55a-301ab. Specialty Contractors -- R200 Factory Built Housing Contractor

The scope of practice for an R200 -- Factory Built Housing Contractor as a specialty contractor license under Subsection 58-55-301(2)(x) is defined in this subsection. (1) Scope. A licensee under this subsection may disconnect, setup, install, or remove manufactured housing on a temporary or permanent basis. (2) Inclusions and Exclusions. The scope described in Subsection 301ab(1) (a) Includes: (i) placing the manufactured housing on a permanent or temporary foundation; (ii) securing the units together if required; (iii) securing the manufactured housing to the foundation; (iv) connecting the utilities from the near proximity, such as a meter, to the manufactured housing unit; and (v) construction of foundations of less than four feet six inches in height; (b) Excludes: (i) preparation or finishing; (ii) excavation of the ground in the area where a foundation is to be constructed, back filling, and grading around the foundation; (iii) construction of foundations of more than four feet six inches in height; and (iv) construction of utility services from the utility source, to and including the meter or meters if required, or if not required to the near proximity of the manufactured housing unit from which they are connected to the unit. (3) Subcontracting and Hiring. An R200 licensee providing services under this Chapter may not subcontract or hire any person to perform work on a project outside the scope defined in Subsection R156-55a-301ab(1).