R156-55a-301z. Specialty Contractors -- S220 Carpentry and Flooring Contractor

The scope of practice for an S220-- Carpentry and Flooring Contractor as a specialty contractor license under Subsection 58-55-301(2)(x) is defined in this subsection. (1) Scope. A licensee under this subsection may construct, fabricate, install, place, tie, weld, or repair using: (a) wood, wood products, metal, aluminum, metal products, metal studs, vinyl materials, plastic, rubber, fiberglass, polyethylene, thermoplastic polymers, countertops, cabinets, millwork, garage doors, doors, trim, tub liners, wall systems, partitions, or other wood, plastic, rubber, or metal composite or any composite that is by custom and usage accepted in the building industry as carpentry for structural, non-structural, and finish purposes; (b) metal or steel structures and sheet metal, including metal cornices, marquees, metal soffits, flashings, skylights, and skydomes; (c) metal structural studs and bearing walls, reinforcing bars, erecting shapes, plates of any profile, perimeter cross-section that are used in structures, including riveting, welding, and rigging; (d) laminate, tile, cement, wood, synthetic wood, or similar flooring product, including prefinished and unfinished material, sanding, staining and finishing of new and existing flooring, the underlayment, and subfloors; and (e) mechanical insulation of pipes, ducts, or conduits. (2) Inclusions and Exclusions. The scope described in Subsection 301z(1) includes incidental concrete work and footings, grading, and surface preparation related to this scope of work. (3) Subcontracting and Hiring. An S220 licensee providing services under this Chapter may not subcontract or hire any person to perform work on a project outside the scope defined in Subsection R156-55a-301z(1).