R708-21-12. Grounds for Revocation, Probation or Denial to Issue or Renew Third-party Tester or Third-party Examiner Certification

(1) A Third-party Tester or Third-party Examiner may be revoked, denied or placed on probation for any of the following reasons: (a) failure to comply with any of the provisions of 49 CFR 383.75; (b) failure to comply with any of the provisions of Section 53-3-407; (c) failure to comply with any of the provisions of R708-21; (d) falsification of any records or other required information relating to the Third-party Tester program; (e) commission of any act that compromises the integrity of the Third-party Tester Program Commercial Motor Vehicle Safety Act, 1986; (f) failure to permit and cooperate with the division or federal representative to inspect the testing routes, testing sites or score sheets issued to the Third-party Tester; and (g) conviction of any crime involving dishonesty, deception, theft, or an act involving moral turpitude by a Third-party Tester or Third-party Examiner. (2) In determining whether revocation, denial or probation of a certification is appropriate, the division shall consider the third-party tester or third-party examiners involvement and severity of the violation(s). (3) If a Third-party Examiner certificate is revoked under the emergency provisions of Section 63G-4-502, and the Third-party Tester certificate is valid, the Third-party Tester may continue conducting CDL driving skills tests provided: (a) the Third-party Examiner is no longer employed by the Third-party Tester; (b) a Third-party Examiner with a valid certificate is employed by the Third-party Tester; (c) testing shall not compromise public safety; and (d) the Third-party Tester is found to not knowingly have allowed a Third-party Examiner to conduct tests that violate state or federal laws, or any provision of R708-21. (4) Following cancellation of the Third-party Tester certification, the Third-party Tester shall promptly return all CDL skills test documents. Documentation includes at a minimum: (a) CDL Examiner manual; (b) used and blank score sheets; and (c) Third-party Examiner certificates.