R708-31-8. Camera Requirements

(1) A manufacturer submitting a system for certification shall ensure cameras installed on a system shall: (a) not impede the field of vision for the safe and legal operation of the vehicle; (b) not pose a threat to the driver or passengers of the vehicle in the event of dislodgement; (c) take an image of the individual with sufficient clarity to allow identification; (d) capture images of the individual conducting the breath alcohol test for the following: (i) successful completion of the initial breath test sample; (ii) successful completion of any retest breath test sample; (iii) unsuccessful delivery of the initial breath test sample; (iv) unsuccessful delivery of any retest breath test sample; and (v) high breath alcohol test results; (e) capture identifiable images in any lighting condition; and (f) incorporate tamper detection features that include: (i) covering, blocking, or coating of the lens to distort the image; (ii) repositioning of the field of view so that it no longer is aimed at the driver; and (iii) disconnection from communication or power from the system. (2) Images taken by the camera shall be stored by the manufacturer with the: (a) date and time of the image capture; (b) results of each breath test; and (c) corresponding system serial number of the: (i) relay; and (ii) handset. (3) A manufacturer shall have data readily available to the division upon request. (4) A system shall be decertified by the division if the system is not equipped with a camera by October 31, 2024.