R307-401-11

R307-401-11. Replacement-in-Kind Equipment

Last amended: 2025Length: 310 wordsOfficial source

Cite as Utah Admin. Code R307-401-11

(1) Applicability. Existing process equipment or pollution control equipment that is covered by an existing approval order or State Implementation Plan requirement may be replaced using the procedures in Subsection (2) if: (a) the potential to emit of the process equipment is the same or lower; (b) the number of emission points or emitting units is the same or lower; (c) no additional types of air pollutants are emitted as a result of the replacement; (d) the process equipment or pollution control equipment is identical to or functionally equivalent to the replaced equipment; (e) the replacement does not change the basic design parameters of the process unit or pollution control equipment; (f) the replaced process equipment or pollution control equipment is permanently removed from the stationary source, otherwise permanently disabled, or permanently barred from operation; (g) the replacement process equipment or pollution control equipment does not trigger New Source Performance Standards or National Emissions Standards for Hazardous Air Pollutants under 42 U.S.C. 7411 or 7412; and (h) the replacement of the control apparatus or process equipment does not violate any other requirement of Title R307. (2) Replacement-in-Kind Procedures. (a) In lieu of filing a notice of intent under Section R307-401-5, the owner or operator of a stationary source shall submit a written notification to the director before replacing the equipment. The notification shall contain a description of the replacement-in-kind equipment, including the control capability of any control apparatus and a demonstration that the conditions of Subsection (1) are met. (b) If the replacement-in-kind meets the conditions of Subsection (1), the director will update the source's approval order and notify the owner or operator. Public review under Section R307-401-7 is not required for the update to the approval order. (3) If the replaced process equipment or pollution control equipment is brought back into operation, it shall constitute a new emissions unit.
R307-401-11: R307-401-11. Replacement-in-Kind Equipment | Justis AI