R315-262-32

R315-262-32. Pre-Transport Requirements Applicable to Small and Large Quantity Generators -- Marking

Last amended: 2025Length: 188 wordsOfficial source

Cite as Utah Admin. Code R315-262-32

(a) Before transporting or offering hazardous waste for transportation off-site, a generator shall mark each package of hazardous waste in accordance with the applicable Department of Transportation regulations on hazardous materials under 49 CFR part 172; (b) Before transporting hazardous waste or offering hazardous waste for transportation off site, a generator shall mark each container of 119 gallons or less used in such transportation with the following words and information in accordance with the requirements of 49 CFR 172.304: (1) HAZARDOUS WASTE-Federal Law Prohibits Improper Disposal. If found, contact the nearest police or public safety authority or the U.S. Environmental Protection Agency. (2) Generator's Name and Address ____. (3) Generator's EPA Identification Number ____. (4) Manifest Tracking Number ____. (5) EPA Hazardous Waste Number(s) ____. (c) A generator may use a nationally recognized electronic system, such as bar coding, to identify the EPA Hazardous Waste Number(s), as required by Subsection R315-262-32(b)(5) or paragraph (d). (d) Lab packs that will be incinerated in compliance with Subsection R315-268-42(c) are not required to be marked with EPA Hazardous Waste Number(s), except D004, D005, D006, D007, D008, D010, and D011, where applicable.
R315-262-32: R315-262-32. Pre-Transport Requirements Applicable to Small and Large Quantity Generators -- Marking | Justis AI