R392-200-14. Handwashing Sinks

The governing body shall ensure that: (1) a handwashing sink is placed in or immediately adjacent to each toilet facility; (2) a handwashing sink is located in or conveniently adjacent to at least the following instruction areas: (a) elementary classrooms; (b) life skills classrooms; (c) art classrooms, except digital media; (d) chemistry labs; (e) biology labs; (f) auto shops; (g) wood and metal shops; (h) drama set building areas; (i) any location where an individual is required to handle a liquid that may burn, irritate, or otherwise harm the skin; (j) any location where an individual changes a diaper, as specified in Section R392-200-22; and (k) any location where an individual is required to handle plants or animals. (3) water provided at a handwashing sink is tempered to or adjustable to a minimum of 100 degrees Fahrenheit and does not exceed 110 degrees Fahrenheit; (4) each handwashing sink is installed at a height appropriate to the individuals who use it; (5) each handwashing sink is provided with: (a) hot and cold water; and (b) a faucet that utilizes a mixing valve or a combination faucet; (6) each self-closing, slow-closing, or metering faucet in use is designed to provide a flow of water for a sufficient length of time to rinse both hands; (7) each handwashing sink and any related fixture is kept clean and maintained in good repair. (8) hand cleaning soap or detergent is provided at a convenient location near each handwashing sink; (9) one of the following approved hand drying provisions is conveniently located near each handwashing sink: (a) disposable paper towels that are: (i) in a protective dispenser; and (ii) dispensed one towel at a time; (b) a forced-air mechanical hand-drying device that provides heated air; or (c) cloth towels if a towel or segment of a roll cloth towel is: (i) provided to each person; and (ii) laundered after use;