Washington · Regulations
Chapter 296-835 — DIPPING AND COATING OPERATIONS (DIP TANKS)
33 sections
33 sections
- WAC 296-835-099WAC 296-835-099. Definitions
- WAC 296-835-100WAC 296-835-100. Scope
- WAC 296-835-110WAC 296-835-110. General requirements
- WAC 296-835-120WAC 296-835-120. Additional requirements for dip tanks using flammable liquids or liquids with flashpoints greater than 199.4°F (93°C)
- WAC 296-835-130WAC 296-835-130. Additional requirements for dip tanks used for specific processes
- WAC 296-835-11005WAC 296-835-11005. Construct safe dip tanks
- WAC 296-835-11010WAC 296-835-11010. Provide proper ventilation for the vapor area
- WAC 296-835-11015WAC 296-835-11015. Take additional precautions if you recirculate ventilation system exhaust air into the workplace
- WAC 296-835-11020WAC 296-835-11020. Take additional precautions when using an exhaust hood
- WAC 296-835-11025WAC 296-835-11025. Periodically inspect your dip tanks and associated equipment and correct any deficiencies
- WAC 296-835-11030WAC 296-835-11030. Make sure employees working near dip tanks know appropriate first-aid procedures
- WAC 296-835-11035WAC 296-835-11035. Prepare dip tanks before cleaning
- WAC 296-835-11040WAC 296-835-11040. Safeguard cyanide tanks
- WAC 296-835-11045WAC 296-835-11045. Protect employees during welding, burning, or other work using open flames
- WAC 296-835-11050WAC 296-835-11050. Protect employees that use liquids that may burn, irritate, or otherwise harm the skin
- WAC 296-835-12005WAC 296-835-12005. Include additional safeguards when constructing dip tanks
- WAC 296-835-12010WAC 296-835-12010. Provide overflow pipes
- WAC 296-835-12015WAC 296-835-12015. Provide bottom drains
- WAC 296-835-12020WAC 296-835-12020. Provide fire protection in the vapor area
- WAC 296-835-12025WAC 296-835-12025. Provide additional fire protection for large dip tanks
- WAC 296-835-12035WAC 296-835-12035. Prevent static electricity sparks or arcs when adding liquids to a dip tank
- WAC 296-835-12040WAC 296-835-12040. Control ignition sources
- WAC 296-835-12045WAC 296-835-12045. Provide safe electrical wiring and equipment where the liquid can drip or splash
- WAC 296-835-12050WAC 296-835-12050. Keep the area around dip tanks clear of combustible material and properly dispose of waste
- WAC 296-835-12055WAC 296-835-12055. Make sure heating the liquid in your dip tanks does not cause a fire
- WAC 296-835-12060WAC 296-835-12060. Make sure a heating system used for drying objects does not cause a fire
- WAC 296-835-12065WAC 296-835-12065. Make sure conveyor systems are safe
- WAC 296-835-13005WAC 296-835-13005. Meet specific requirements if you use a hardening or tempering tank
- WAC 296-835-13010WAC 296-835-13010. Meet specific requirements if you use electrostatic equipment
- WAC 296-835-13015WAC 296-835-13015. Meet specific requirements if you use a flow coating process
- WAC 296-835-13020WAC 296-835-13020. Take additional precautions if your roll coating operation uses a liquid that has a flashpoint below 140°F (60°C)
- WAC 296-835-13025WAC 296-835-13025. Provide additional safeguards for vapor degreasing tanks
- WAC 296-835-13030WAC 296-835-13030. Control liquid spray over an open surface cleaning or degreasing tank