WAC 246-272B-04300. Monitoring and reporting plan

At a minimum, the monitoring and reporting plan must include: (1) Constituents of the sewage or effluent that must be tested to assure that treatment components are meeting treatment level requirements, and to monitor groundwater or surface water: (a) As required by the department; and (b) For process control. (2) Values or ranges of values that must be met for the constituents listed in subsection (1) of this section; (3) Sampling frequency, including time and day samples will be taken. Samples must be taken when maximum concentrations of contaminants are expected; (4) Procedures for decontaminating sampling equipment and sample ports; (5) Field test methods; (6) Sampling methods; (7) Well purging methods, if applicable; (8) Handling and labeling of containers; (9) Holding times; (10) Quality assurance and quality control procedures; (11) Transport of samples; (12) List of equipment that will be used for sampling and field testing; (13) Test method for each constituent; (14) Monitoring that will be performed by a proprietary treatment manufacturer or their agent as described in WAC 246-272B-04100 (1)(g)(v); (15) Map or schematics showing any monitoring wells and all sample points; (16) Plans and construction specifications for monitoring wells, monitoring points, and piezometers; (17) Response plan for abnormal or elevated sampling results which may include additional sampling, notification to the department, treatment, or other appropriate action; (18) Any report forms; (19) Procedures for submitting required monitoring results to the department; and (20) Procedures and schedules for recordkeeping.