WAC 296-78-70501

WAC 296-78-70501. Definitions — Terms, general

Last amended: 2017Year: 2026Length: 338 wordsOfficial source
Block(s). Those sections of a log cut in various lengths. Block(s) and bolt(s). May be considered to be synonymous. Clipper saw. A circular saw used to trim manufactured shingles. Groover. A cylinder-type knife (knives) similar to a planer knife (knives), used to cut grooves into the face surface of shakes or shingles. Hip and ridge saw. A circular saw used to cut various angles on the side edge of shakes or shingles. Johnson bar. A shaft used to control the feed of the carriage. Knee bolter circular saw. A stationary circular saw used to trim and debark blocks (the blocks are manually maneuvered onto a carriage and fed into a saw). Log haul. A power conveyor used to move logs to mill. Packers. Employees who pack the manufactured shakes or shingles into bundles. Panagraph power splitter. A hydraulically operated wedge, manually positioned into place, used to split blocks. Power saw splitter. A stationary circular saw used to split (saw) blocks, (the blocks are manually maneuvered onto a carriage and fed into the saw). Set works. A component of the shingle machine, located on the machine frame, used to control the thickness of each shingle being manufactured. Shake machine. A band saw used to cut shake blanks into manufactured shakes. Shake splitter. A stationary hydraulically operated wedge, manually controlled, used to split shake blocks into shake blanks or boards. Shim saw. A circular saw used to recut manufactured shingles into narrow widths. Shingle machine. A machine used to manufacture shingles; composed of a feed, set works, and carriage system, all functioning in relation to a circular saw. Shingle saw. A circular saw used to cut shingles from blocks. Spault. The first and last section(s) of a block as it is cut into shingles. Spault catcher. A device located on the shingle machine next to the solid feed rolls, used to hold the last section of each block being cut (called a spault), in place. Track or swing cutoff saw. A circular saw used to cut blocks from a log.
WAC 296-78-70501: WAC 296-78-70501. Definitions — Terms, general | Justis AI