WAC 296-806-20050. Make sure restraint or pullback devices meet these requirements

Important: All devices must meet the general requirements for devices found in, Make sure devices meet these requirements, WAC 296-806-20044 . You must make sure restraint or pullback devices: (1) Prevent the operator from reaching into the point of operation or withdraw the operator's hands from the point of operation before motion of the machine creates a hazard. (2) Have fasteners, pins, and other items used to secure and maintain the setting of the device applied in a way that minimizes loosening, slipping, or failure during use. (3) Are worn inside gloves, if used, so if a glove becomes trapped inside a machine or tool, the device can still remove the operator's hand from the hazard area.