WAC 296-806-48062. Make sure molding, sticking and matching machines meet these requirements

(1) You must make sure all cutting heads, and saws if used, are covered by a guard that: (a) Is metal. (b) Forms all or part of the exhaust hood if an exhaust system is used. (2) You must make sure a guard constructed from: (a) Sheet metal is at least one-sixteenth inch thick. (b) Cast iron is at least three-sixteenths inch thick. (3) You must make sure feed rolls are guarded by a hood or other suitable guard that both: (a) Prevents the operator's hand from contacting the in-running rolls at any point; and (b) Is attached to the frame carrying the rolls so it adjusts for any thickness of stock.