WAC 296-870-600. Section contents

Summary Important: This section applies to permanent powered platform installations that meet either of the following: (1) Were completed after July 23, 1990; or (2) Have had major modifications done to an existing installation after July 23, 1990. Note: If affected parts of the building meet the requirements of the edition of American National Standard Institute/American Society of Mechanical Engineers ANSI/ASME A120.1, Safety Requirements for Powered Platforms for Building Maintenance, that was in effect when the powered platform installation was completed, they will be considered to meet the requirements of this section. Your responsibility: To make sure new powered platform installations meet these building requirements. You must meet the requirements … in this section: Design WAC 296-870-60005 Stabilization systems WAC 296-870-60010 Intermittent stabilization system WAC 296-870-60015 Button guide stabilization system WAC 296-870-60020 Stabilization system using angulated roping and building face rollers WAC 296-870-60025 Cable stabilization WAC 296-870-60030 Electrical WAC 296-870-60035 Guarding roofs and other elevated areas WAC 296-870-60040 Moving equipment WAC 296-870-60045 Repair and maintenance WAC 296-870-60050 Communications WAC 296-870-60055 You must meet the requirements … in this section: Design WAC 296-870-60005 Stabilization systems WAC 296-870-60010 Intermittent stabilization system WAC 296-870-60015 Button guide stabilization system WAC 296-870-60020 Stabilization system using angulated roping and building face rollers WAC 296-870-60025 Cable stabilization WAC 296-870-60030 Electrical WAC 296-870-60035 Guarding roofs and other elevated areas WAC 296-870-60040 Moving equipment WAC 296-870-60045 Repair and maintenance WAC 296-870-60050 Communications WAC 296-870-60055