CSR 45-18-16. Inconsistency Between Rules

45-18-16. Inconsistency Between Rules. 16.1. In the event of any inconsistency between this rule and any other rule of the West Virginia Department of Environmental Protection, the inconsistency shall be resolved by the determination of the Secretary and the determination shall be based upon the application of the more stringent provision, term, condition, method or rule. TABLE 18-1A Emissions Limits for Small, Medium, and Large HMIWI at Designated Facilities as Set Forth in 45CSR18-7.2.a.1. 1Except as allowed under 40 CFR 60.56c(c) for HMIWI equipped with CEMS. 2Does not include CEMS and approved alternative non-EPA test methods allowed under 40 CFR 60.56c(b). TABLE 18-1B Emissions Limits for Small, Medium, and Large HMIWI at Designated Facilities as Set Forth in 45CSR18-7.2.a.1 and 7.2.a.2. 1Except as allowed under 40 CFR 60.56c(c) for HMIWI equipped with CEMS. 2Does not include CEMS and approved alternative non-EPA test methods allowed under 40 CFR 60.56c(b). TABLE 18-2A Emissions Limits for Small HMIWI Which Meet the Criteria Under 45CSR18-7.3.b.1. 1Except as allowed under 40 CFR 60.56c(c) for HMIWI equipped with CEMS. 2Does not include CEMS and approved alternative non-EPA test methods allowed under 40 CFR 60.56c(b). TABLE 18-2B Emissions Limits for Small HMIWI Which Meet the Criteria Under 45CSR18-7.3.b.2. 1Except as allowed under 40 CFR 60.56c(c) for HMIWI equipped with CEMS. 2Does not include CEMS and approved alternative non-EPA test methods allowed under 40 CFR 60.56c(b). TABLE 18-1C Emission Limits for Existing Commercial and Industrial Solid Waste Incineration Units a All emission limitations (except for opacity) are measured at 7 percent oxygen, dry basis at standard conditions. Pollutant Units (7 percent oxygen, dry basis) Emissions Limits Emissions Limits Emissions Limits Averaging Time1 Compliance Method2 Pollutant Units (7 percent oxygen, dry basis) HMIWI Size HMIWI Size HMIWI Size Averaging Time1 Compliance Method2 Pollutant Units (7 percent oxygen, dry basis) Small Medium Large Averaging Time1 Compliance Method2 Particulate matter Milligrams per dry standard cubic meter (mg/dscm) (grains per dry standard cubic foot (gr/dscf)) 115 (0.05) 69 (0.03) 34 (0.015) 3-run average (1-hour minimum sample time per run) EPA Reference Method 5 of Appendix A-3 of 40 CFR Part 60, or EPA Reference Method 26A or 29 of Appendix A-8 of 40 CFR Part 60. Carbon monoxide Parts per million by volume (ppmv) 40 40 40 3-run average (1-hour minimum sample time per run) EPA Reference Method 10 or 10B of Appendix A-4 of 40 CFR Part 60. Dioxins/furans Nanograms per dry standard cubic meter total dioxins/furans (ng/dscm) (grains per billion dry standard cubic feet (gr/109dscf)) or ng/dscm TEQ (gr/109dscf) 125 (55) or 2.3 (1.0) 125 (55) or 2.3 (1.0) 125 (55) or 2.3 (1.0) 3-run average (4-hour minimum sample time per run) EPA Reference Method 23 of Appendix A-7 of 40 CFR Part 60. Hydrogen chloride ppmv or percent reduction 100 or 93% 100 or 93% 100 or 93% 3-run average (1-hour minimum sample time per run) EPA Reference Method 26 or 26A of Appendix A-8 of 40 CFR Part 60. Sulfur dioxide ppmv 55 55 55 3-run average (1-hour minimum sample time per run) EPA Reference Method 6 or 6C of Appendix A-4 of 40 CFR Part 60. Nitrogen oxides ppmv 250 250 250 3-run average (1-hour minimum sample time per run) EPA Reference Method 7 or 7E of Appendix A-4 of 40 CFR Part 60. Lead mg/dscm (grains per thousand dry standard cubic feet (gr/103dscf)) or percent reduction 1.2 (0.52) or 70% 1.2 (0.52) or 70% 1.2 (0.52) or 70% 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of Appendix A-8 of 40 CFR Part 60. Cadmium mg/dscm (gr/103dscf) or percent reduction 0.16 (0.07) or 65% 0.16 (0.07) or 65% 0.16 (0.07) or 65% 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of Appendix A-8 of 40 CFR Part 60. Mercury mg/dscm (gr/103dscf) or percent reduction 0.55 (0.24) or 85% 0.55 (0.24) or 85% 0.55 (0.24) or 85% 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of Appendix A-8 of 40 CFR Part 60. Pollutant Units (7 percent oxygen, dry basis) Emissions Limits Emissions Limits Emissions Limits Averaging Time1 Compliance Method2 Pollutant Units (7 percent oxygen, dry basis) HMIWI Size HMIWI Size HMIWI Size Averaging Time1 Compliance Method2 Pollutant Units (7 percent oxygen, dry basis) Small Medium Large Averaging Time1 Compliance Method2 Particulate matter Milligrams per dry standard cubic meter (mg/dscm) (grains per dry standard cubic foot (gr/dscf)) 66 (0.029) 46 (0.020) 25 (0.011) 3-run average (1-hour minimum sample time per run) EPA Reference Method 5 of Appendix A-3 of 40 CFR Part 60, or EPA Reference Method 26A or 29 of Appendix A-8 of 40 CFR Part 60. Carbon monoxide Parts per million by volume (ppmv) 20 5.5 11 3-run average (1-hour minimum sample time per run) EPA Reference Method 10 or 10B of Appendix A-4 of 40 CFR Part 60. Dioxins/furans Nanograms per dry standard cubic meter total dioxins/furans (ng/dscm) (grains per billion dry standard cubic feet (gr/109dscf)) or ng/dscm TEQ (gr/109dscf) 16 (7.0) or 0.013 (0.0057) 0.85 (0.37) or 0.020 (0.0087) 9.3 (4.1) or 0.054 (0.024) 3-run average (4-hour minimum sample time per run) EPA Reference Method 23 of Appendix A-7 of 40 CFR Part 60. Hydrogen chloride ppmv 44 7.7 6.6 3-run average (1-hour minimum sample time per run) EPA Reference Method 26 or 26A of Appendix A-8 of 40 CFR Part 60. Sulfur dioxide ppmv 4.2 4.2 9.0 3-run average (1-hour minimum sample time per run) EPA Reference Method 6 or 6C of Appendix A-4 of 40 CFR Part 60. Nitrogen oxides ppmv 190 190 140 3-run average (1-hour minimum sample time per run) EPA Reference Method 7 or 7E of Appendix A-4 of 40 CFR Part 60. Lead mg/dscm (grains per thousand dry standard cubic feet (gr/103dscf)) 0.31 (0.14) 0.018 (0.0079) 0.036 (0.016) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of Appendix A-8 of 40 CFR Part 60. Cadmium mg/dscm (gr/103dscf) 0.017 (0.0074) 0.013 (0.0057) 0.0092 (0.0040) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of Appendix A-8 of 40 CFR Part 60. Mercury mg/dscm (gr/103dscf) 0.014 (0.0061) 0.025 (0.011) 0.018 (0.0079) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of Appendix A-8 of 40 CFR Part 60. Pollutant Units (7 percent oxygen, dry basis) HMIWI Emissions Limits Averaging Time1 Compliance Method2 Particulate matter mg/dscm (gr/dscf) 197 (0.086) 3-run average (1-hour minimum sample time per run) EPA Reference Method 5 of Appendix A-3 of 40 CFR Part 60, or EPA Reference Method 26A or 29 of Appendix A-8 of 40 CFR Part 60. Carbon monoxide ppmv 40 3-run average (1-hour minimum sample time per run) EPA Reference Method 10 or 10B of Appendix A-4 of 40 CFR Part 60. Dioxins/furans ng/dscm total dioxins/furans (gr/109dscf) or ng/dscm TEQ (gr/109dscf) 800 (350) or 15 (6.6) 3-run average (4-hour minimum sample time per run) EPA Reference Method 23 of Appendix A-7 of 40 CFR Part 60. Hydrogen chloride ppmv 3,100 3-run average (1-hour minimum sample time per run) EPA Reference Method 26 or 26A of Appendix A-8 of 40 CFR Part 60. Sulfur dioxide ppmv 55 3-run average (1-hour minimum sample time per run) EPA Reference Method 6 or 6C of Appendix A-4 of 40 CFR Part 60. Nitrogen oxides ppmv 250 3-run average (1-hour minimum sample time per run) EPA Reference Method 7 or 7E of Appendix A-4 of 40 CFR Part 60. Lead mg/dscm (gr/103dscf) 10 (4.4) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of Appendix A-8 of 40 CFR Part 60. Cadmium mg/dscm (gr/103dscf) 4 (1.7) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of Appendix A-8 of 40 CFR Part 60. Mercury mg/dscm (gr/103dscf) 7.5 (3.3) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of Appendix A-8 of 40 CFR Part 60. Pollutant Units (7 percent oxygen, dry basis) HMIWI Emissions Limits Averaging Time1 Compliance Method2 Particulate matter mg/dscm (gr/dscf) 87 (0.038) 3-run average (1-hour minimum sample time per run) EPA Reference Method 5 of Appendix A-3 of 40 CFR Part 60, or EPA Reference Method 26A or 29 of Appendix A-8 of 40 CFR Part 60. Carbon monoxide ppmv 20 3-run average (1-hour minimum sample time per run) EPA Reference Method 10 or 10B of Appendix A-4 of 40 CFR Part 60. Dioxins/furans ng/dscm total dioxins/furans (gr/109dscf) or ng/dscm TEQ (gr/109dscf) 240 (100) or 5.1 (2.2) 3-run average (4-hour minimum sample time per run) EPA Reference Method 23 of Appendix A-7 of 40 CFR Part 60. Hydrogen chloride ppmv 810 3-run average (1-hour minimum sample time per run) EPA Reference Method 26 or 26A of Appendix A-8 of 40 CFR Part 60. Sulfur dioxide ppmv 55 3-run average (1-hour minimum sample time per run) EPA Reference Method 6 or 6C of Appendix A-4 of 40 CFR Part 60. Nitrogen oxides ppmv 130 3-run average (1-hour minimum sample time per run) EPA Reference Method 7 or 7E of Appendix A-4 of 40 CFR Part 60. Lead mg/dscm (gr/103dscf) 0.50 (0.22) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of Appendix A-8 of 40 CFR Part 60. Cadmium mg/dscm (gr/103dscf) 0.11 (0.048) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of Appendix A-8 of 40 CFR Part 60. Mercury mg/dscm (gr/103dscf) 0.0051 (0.0022) 3-run average (1-hour minimum sample time per run) EPA Reference Method 29 of Appendix A-8 of 40 CFR Part 60. Air Pollutant Emission Limit a Averaging Time Performance Test Methods Cadmium 0.004 milligrams per dry standard cubic meter. 3-run average (1 hour minimum sample time per run). Performance test (Method 29 of 40 CFR Part 60, Appendix A) Carbon monoxide 157 parts per million by dry volume. 3-run average (1 hour minimum sample time per run). Performance test (Method 10, 10A, or 10B, of 40 CFR Part 60, Appendix A) Dioxins/furans (toxic equivalency basis) 0.41 nanograms per dry standard cubic meter. 3-run average (1 hour minimum sample time per run). Performance test (Method 23 of 40 CFR Part 60, Appendix A) Hydrogen chloride 62 parts per million by dry volume. 3-run average (1 hour minimum sample time per run). Performance test (Method 26A of 40 CFR Part 60, Appendix A) Lead 0.04 milligrams per dry standard cubic meter. 3-run average (1 hour minimum sample time per run). Performance test (Method 29 of 40 CFR Part 60, Appendix A) Mercury 0.47 milligrams per dry standard cubic meter. 3-run average (1 hour minimum sample time per run). Performance test (Method 29 of 40 CFR Part 60, Appendix A) Opacity 10 percent 6-minute averages Performance test (Method 9 of 40 CFR Part 60, Appendix A) Oxides of nitrogen 388 parts per million by dry volume. 3-run average (1 hour minimum sample time per run). Performance test (Method 7, 7A, 7C, 7D, or 7E of 40 CFR Part 60, Appendix A) Particulate matter 70 milligrams per dry standard cubic meter. 3-run average (1 hour minimum sample time per run). Performance test (Method 5 or 29 of 40 CFR Part 60, Appendix A) Sulfur dioxide 20 parts per million by dry volume. 3-run average (1 hour minimum sample time per run). Performance test (Method 6 or 6C of 40 CFR Part 60, Appendix A)