CSR 45-40-4. Applicability

§45-40-4. Applicability. 4.1. The owner or operator of a unit that has a maximum design heat input greater than 250 mmBtu/hr, except for any unit subject to the federal Cross-State Air Pollution Rule (CSAPR) NOX Ozone Season Group 2 Trading Program established under 40 CFR part 97, subpart EEEEE, or an equivalent trading program established under 45CSR43 and approved as a state implementation plan revision pursuant to 40 CFR §52.38(b)(9), shall comply with the ozone season NOX emission limitation, and monitoring, recordkeeping and reporting requirements for ozone season emissions of NOX set forth in sections 5 and 6 below. 4.2. Effective May 1, 2009, the owner or operator of a large NOX SIP Call engine shall comply with the ozone season NOX reduction, compliance plan, monitoring, recordkeeping and reporting requirements set forth in section 9 below. 4.3. Effective May 1, 2009, the owner or operator of a kiln that meets the following applicability requirements shall comply with the ozone season NOX control standards, ozone season NOX compliance plan, reporting, monitoring and recordkeeping requirements set forth in section 10 below: 4.3.a. Long dry kilns ≥ 12 TPH process rate; 4.3.b. Long wet kilns ≥ 10 TPH process rate; 4.3.c. Preheater kilns ≥ 16 TPH process rate; and 4.3.d. Precalciner and preheater/precalciner kilns ≥ 22 TPH process rate.