HAR §12-45.4-61. Annual maintenance record keeping

Section 13.6.4.3.4.1.1 is amended to read as follows: The tag or label, as a minimum, shall entail the following: (1) Removing the previous tag or label; (2) Indicating the month and year the maintenance was performed; (3) Type of portable fire extinguisher tested; (4) Certificate of fitness holder’s name and number; (5) Certificate of fitness holder’s company name, address, and contact information; (6) Be yellow, at least two and one-fourth of an inch in width, three and one-fourth of an inch in length, and clearly visible without opening any cabinets; (7) Be constructed of a durable material approved by the AHJ; (8) Be punched with no more than one year and one month of the date of service; and (9) Not obstruct the portable fire extinguisher classification or instructions for use. [Eff ] (Auth: HRS §132-16) (Imp: HRS §132-16) (Required information is needed to identify COF holder’s name and provide uniform tag labeling & information. This also amends the previous amendment by replacing it, hence the renumbering.) §12-45.4-62 Extinguisher maintenance six-year internal examination label. Section 13.6.4.3.6.5.3 is amended to read as follows: 13.6.4.3.6.5.3 The 6-year internal examination label, as a minimum shall, entail the following: (1) Removing the previous six-year internal examination label; (2) Indicating the month and year the six-year internal examination was performed; (3) Certificate of fitness holder’s name and number; (4) Certificate of fitness holder’s company name, address, and contact information; (5) Type of portable fire extinguisher tested; (6) Be silver or white and at least two and one fourth of an inch in width and three and one-fourth of an inch in length; and (7) Not obstruct the portable fire extinguisher classification, instructions for portable fire extinguisher use, or manufacturer’s labels. [Eff ] (Auth: HRS §132-16) (Imp: HRS §132-16) (Additional information needed to identify COF holder and provide uniform tag labeling and information). §12-45.4-63 Extinguisher maintenance service collar information. Section 13.6.4.11.3 is amended to read as follows: 13.6.4.11.3 The verification-of-service collar shall, at a minimum: (1) Indicate the month and year the examination was performed; (2) Display the certificate of fitness holder’s name and number; (3) Display the certificate of fitness holder’s company name, address and contact information; (4) Be a single circular piece of uninterrupted material forming a hole of a size that does not permit the collar assembly to move over the neck of the container unless the valve is completely removed; and (5) Not interfere with the operation of the fire extinguisher. [Eff ] (Auth: HRS §132-16) (Imp: HRS §132-16) (Clarifies information needed on the service collar. This also amends the previous amendment by replacing it, hence the renumbering.) The collar was a certain circumference to ensure the extinguisher stem was physically removed & not slipped over the stem, the contents emptied & the cylinder pressure tested. Need to check this.