Indiana · Regulations
Rule 3.2 — 2. Technical Standards for Water Mains
20 sections
20 sections
- 327 IAC 8-3.2-1327 IAC 8-3.2-1 Definitions
- 327 IAC 8-3.2-2327 IAC 8-3.2-2 Incorporation by reference
- 327 IAC 8-3.2-3327 IAC 8-3.2-3 Applicability
- 327 IAC 8-3.2-4327 IAC 8-3.2-4 Certification
- 327 IAC 8-3.2-5327 IAC 8-3.2-5 Additional information on construction permit applications
- 327 IAC 8-3.2-6327 IAC 8-3.2-6 Required easements; other permits
- 327 IAC 8-3.2-7327 IAC 8-3.2-7 Additional issuance requirements for construction permits
- 327 IAC 8-3.2-8327 IAC 8-3.2-8 Water main materials
- 327 IAC 8-3.2-9327 IAC 8-3.2-9 Separation of water mains from potential sources of contamination or damage
- 327 IAC 8-3.2-10327 IAC 8-3.2-10 Water mains near surface water bodies
- 327 IAC 8-3.2-11327 IAC 8-3.2-11 Flow rate and pressure in the water main
- 327 IAC 8-3.2-12327 IAC 8-3.2-12 Sizing of piping and accessories
- 327 IAC 8-3.2-13327 IAC 8-3.2-13 Use of dead-end mains
- 327 IAC 8-3.2-14327 IAC 8-3.2-14 Placement of isolation valves and air relief valves
- 327 IAC 8-3.2-15327 IAC 8-3.2-15 Fire and flushing hydrants
- 327 IAC 8-3.2-16327 IAC 8-3.2-16 Chamber drainage
- 327 IAC 8-3.2-17327 IAC 8-3.2-17 Installation
- 327 IAC 8-3.2-18327 IAC 8-3.2-18 Disinfection
- 327 IAC 8-3.2-19327 IAC 8-3.2-19 Cross connection control
- 327 IAC 8-3.2-20327 IAC 8-3.2-20 Technical standard alternative demonstration