Indiana · Regulations
Rule 10.1 — 1. Commercial On-Site Sewage Systems
99 sections
99 sections
- 410 IAC 6-10.1-1410 IAC 6-10.1-1 Definitions
- 410 IAC 6-10.1-2410 IAC 6-10.1-2 "AASHTO" defined
- 410 IAC 6-10.1-3410 IAC 6-10.1-3 "ABS" defined
- 410 IAC 6-10.1-4410 IAC 6-10.1-4 "ANSI" defined
- 410 IAC 6-10.1-5410 IAC 6-10.1-5 "ASTM" defined
- 410 IAC 6-10.1-6410 IAC 6-10.1-6 "Cluster system" defined
- 410 IAC 6-10.1-7410 IAC 6-10.1-7 "Commissioner" defined
- 410 IAC 6-10.1-8410 IAC 6-10.1-8 "Commercial on-site sewage system" or "on-site sewage system" defined
- 410 IAC 6-10.1-9410 IAC 6-10.1-9 "Commercial on-site sewage system failure" defined
- 410 IAC 6-10.1-10410 IAC 6-10.1-10 "Construction permit" defined
- 410 IAC 6-10.1-11410 IAC 6-10.1-11 "Densic material" defined
- 410 IAC 6-10.1-12410 IAC 6-10.1-12 "Department" defined
- 410 IAC 6-10.1-13410 IAC 6-10.1-13 "Design daily flow" or "DDF" defined
- 410 IAC 6-10.1-14410 IAC 6-10.1-14 "Distribution box" defined
- 410 IAC 6-10.1-15410 IAC 6-10.1-15 "Drainageway" defined
- 410 IAC 6-10.1-16410 IAC 6-10.1-16 "Dwelling" or "residence" defined
- 410 IAC 6-10.1-17410 IAC 6-10.1-17 "Fill" defined
- 410 IAC 6-10.1-18410 IAC 6-10.1-18 "Grease trap" defined
- 410 IAC 6-10.1-19410 IAC 6-10.1-19 "Health officer" defined
- 410 IAC 6-10.1-20410 IAC 6-10.1-20 "High strength waste" defined
- 410 IAC 6-10.1-21410 IAC 6-10.1-21 "INDOT" defined
- 410 IAC 6-10.1-22410 IAC 6-10.1-22 "Interceptor drain" defined
- 410 IAC 6-10.1-23410 IAC 6-10.1-23 "Local health department" defined
- 410 IAC 6-10.1-24410 IAC 6-10.1-24 "NEMA" defined
- 410 IAC 6-10.1-25410 IAC 6-10.1-25 "NRCS" defined
- 410 IAC 6-10.1-26410 IAC 6-10.1-26 "NSF" defined
- 410 IAC 6-10.1-27410 IAC 6-10.1-27 "Operating permit" defined
- 410 IAC 6-10.1-28410 IAC 6-10.1-28 "Owner" defined
- 410 IAC 6-10.1-29410 IAC 6-10.1-29 "Perimeter drain" defined
- 410 IAC 6-10.1-30410 IAC 6-10.1-30 "Person" defined
- 410 IAC 6-10.1-31410 IAC 6-10.1-31 "PVC" defined
- 410 IAC 6-10.1-32410 IAC 6-10.1-32 "Regulatory flood elevation"or "RFE" defined
- 410 IAC 6-10.1-33410 IAC 6-10.1-33 "Sanitary sewerage system" defined
- 410 IAC 6-10.1-34410 IAC 6-10.1-34 "SDR" defined
- 410 IAC 6-10.1-35410 IAC 6-10.1-35 "Seasonal high water table" defined
- 410 IAC 6-10.1-36410 IAC 6-10.1-36 "Segment drain" defined
- 410 IAC 6-10.1-37410 IAC 6-10.1-37 "Septic tank" defined
- 410 IAC 6-10.1-38410 IAC 6-10.1-38 "Sewage" defined
- 410 IAC 6-10.1-39410 IAC 6-10.1-39 "Soil absorption" defined
- 410 IAC 6-10.1-40410 IAC 6-10.1-40 "Soil absorption system" or "soil absorption field" defined
- 410 IAC 6-10.1-41410 IAC 6-10.1-41 "Soil horizon" defined
- 410 IAC 6-10.1-42410 IAC 6-10.1-42 "Soil loading rate" defined
- 410 IAC 6-10.1-43410 IAC 6-10.1-43 "Soil profile analysis" defined
- 410 IAC 6-10.1-44410 IAC 6-10.1-44 "Soil scientist" defined
- 410 IAC 6-10.1-45410 IAC 6-10.1-45 "Start of construction" defined
- 410 IAC 6-10.1-46410 IAC 6-10.1-46 "Subsurface drainage system" defined
- 410 IAC 6-10.1-47410 IAC 6-10.1-47 "Technology new to Indiana" or "TNI" defined
- 410 IAC 6-10.1-48410 IAC 6-10.1-48 Administrative authority
- 410 IAC 6-10.1-49410 IAC 6-10.1-49 General sewage disposal requirements
- 410 IAC 6-10.1-50410 IAC 6-10.1-50 Construction permit requirements
- 410 IAC 6-10.1-51410 IAC 6-10.1-51 Application for construction permit
- 410 IAC 6-10.1-52410 IAC 6-10.1-52 Standards for issuance
- 410 IAC 6-10.1-53410 IAC 6-10.1-53 Construction permit conditions
- 410 IAC 6-10.1-54410 IAC 6-10.1-54 Operating permits
- 410 IAC 6-10.1-55410 IAC 6-10.1-55 Denial of an application for a construction or operating permit
- 410 IAC 6-10.1-56410 IAC 6-10.1-56 Revocation or modification of a construction or operating permit
- 410 IAC 6-10.1-57410 IAC 6-10.1-57 Petitions for appeal
- 410 IAC 6-10.1-58410 IAC 6-10.1-58 Violations
- 410 IAC 6-10.1-59410 IAC 6-10.1-59 Construction and operating permit; transferability
- 410 IAC 6-10.1-60410 IAC 6-10.1-60 Sewage flows
- 410 IAC 6-10.1-61410 IAC 6-10.1-61 Minimum separation distances
- 410 IAC 6-10.1-62410 IAC 6-10.1-62 Dispersal area
- 410 IAC 6-10.1-63410 IAC 6-10.1-63 Drainage
- 410 IAC 6-10.1-64410 IAC 6-10.1-64 On-site evaluation
- 410 IAC 6-10.1-65410 IAC 6-10.1-65 Construction of sewers
- 410 IAC 6-10.1-66410 IAC 6-10.1-66 Grease traps
- 410 IAC 6-10.1-67410 IAC 6-10.1-67 Sewage lift stations and force mains
- 410 IAC 6-10.1-68410 IAC 6-10.1-68 Septic tanks: general requirements
- 410 IAC 6-10.1-69410 IAC 6-10.1-69 Septic tanks: construction details
- 410 IAC 6-10.1-70410 IAC 6-10.1-70 Dosing tanks
- 410 IAC 6-10.1-71410 IAC 6-10.1-71 Septic tanks and dosing tanks: installation and maintenance
- 410 IAC 6-10.1-72410 IAC 6-10.1-72 Outlet filters
- 410 IAC 6-10.1-73410 IAC 6-10.1-73 Effluent pumps
- 410 IAC 6-10.1-74410 IAC 6-10.1-74 Distribution box specifications
- 410 IAC 6-10.1-75410 IAC 6-10.1-75 Pipe specifications
- 410 IAC 6-10.1-76410 IAC 6-10.1-76 Aggregate specifications
- 410 IAC 6-10.1-77410 IAC 6-10.1-77 Barrier materials
- 410 IAC 6-10.1-78410 IAC 6-10.1-78 Subsurface trench on-site sewage system site suitability
- 410 IAC 6-10.1-79410 IAC 6-10.1-79 Subsurface trench on-site sewage system type selection criteria
- 410 IAC 6-10.1-80410 IAC 6-10.1-80 Elevated sand mound on-site sewage system site suitability
- 410 IAC 6-10.1-81410 IAC 6-10.1-81 Table for on-site sewage system selection
- 410 IAC 6-10.1-82410 IAC 6-10.1-82 Subsurface trench on-site sewage systems: general design and construction requirements
- 410 IAC 6-10.1-83410 IAC 6-10.1-83 Subsurface trench gravity on-site sewage systems: design and construction requirements
- 410 IAC 6-10.1-84410 IAC 6-10.1-84 Subsurface trench flood dosed on-site sewage systems: design and construction requirements
- 410 IAC 6-10.1-85410 IAC 6-10.1-85 Subsurface trench alternating field on-site sewage systems: design and construction requirements
- 410 IAC 6-10.1-86410 IAC 6-10.1-86 Subsurface trench pressure distribution on-site sewage systems: design and construction requirements
- 410 IAC 6-10.1-87410 IAC 6-10.1-87 Elevated sand mound on-site sewage systems: design of the aggregate bed
- 410 IAC 6-10.1-88410 IAC 6-10.1-88 Elevated sand mound on-site sewage systems: design of basal area
- 410 IAC 6-10.1-89410 IAC 6-10.1-89 Elevated sand mound on-site sewage systems: dimensions of the elevated sand mound
- 410 IAC 6-10.1-90410 IAC 6-10.1-90 Elevated sand mound on-site sewage systems: pressure distribution network
- 410 IAC 6-10.1-91410 IAC 6-10.1-91 Elevated sand mound on-site sewage systems: protection of the site
- 410 IAC 6-10.1-92410 IAC 6-10.1-92 Elevated sand mound on-site sewage systems: requirements for system construction
- 410 IAC 6-10.1-93410 IAC 6-10.1-93 Elevated sand mound on-site sewage systems: installation of the effluent force main
- 410 IAC 6-10.1-94410 IAC 6-10.1-94 Elevated sand mound on-site sewage systems: preparation of the site
- 410 IAC 6-10.1-95410 IAC 6-10.1-95 Elevated sand mound on-site sewage systems: placement of the sand on the basal area
- 410 IAC 6-10.1-96410 IAC 6-10.1-96 Elevated sand mound on-site sewage systems: construction of the aggregate bed
- 410 IAC 6-10.1-97410 IAC 6-10.1-97 Elevated sand mound on-site sewage systems: placement of the soil material and final grade
- 410 IAC 6-10.1-98410 IAC 6-10.1-98 Abandonment of an on-site sewage system
- 410 IAC 6-10.1-99410 IAC 6-10.1-99 Matters incorporated by reference