326 IAC 15-1-3 Control of fugitive lead dust

Sec. 3. All sources listed in section 2 of this rule shall comply with the following requirements: (1) No source shall create or maintain outdoor storage of bulk materials containing more than one percent (1.0%) lead by weight of less than two hundred (200) mesh size particles. (2) All materials containing more than one percent (1.0%) lead by weight of less than two hundred (200) mesh size particles shall be transported in closed containers or shall be transported by enclosed conveying systems that are vented to the atmosphere through particulate matter control equipment or shall be transported wet. (3) Control programs shall be designed to minimize emissions of lead from all nonprocess fugitive emission points. The programs shall include good housekeeping practices for the cleanup of spills and for minimizing emissions from loading and unloading areas as applicable. For sources listed in section 2(a) of this rule, these programs shall be submitted to the department on or before June 1, 1987. For the source listed in section 2(b) of this rule, these programs shall be submitted to the department on or before February 1, 1988. These programs will be incorporated into the individual source operation permits.