LAC 51:XXX.501. Consumable Hemp Products Labeling Requirements: Certificate of Analysis [formerly LAC 49:I.519]

A. Consumable hemp products must bear labeling that includes a scannable bar code, QR code, or a web address linked to a document or website containing the certificate of analysis for that product. B. The certificate of analysis must be from a laboratory that is accredited by the Louisiana Department of Health, Office of Public Health (LDH/OPH). Accreditation will be demonstrated by the availability of a current audit from a third-party entity indicating that the laboratory meets the criteria specified in Standard 17025 of the accrediting body. C. The certificate of analysis must include, at a minimum, the following information: 1. the batch number of the product; 2. the date the batch was received by the laboratory; 3. the date the testing was completed; 4. the laboratory methodology used for each analysis referenced in the report; 5. a cannabinoid profile for the finished product listing all major cannabinoid constituents by percentage of dry weight; 6. serving size for the product, total THC (as defined in R.S. 3:1481) per serving, number of servings per package, and total THC per package (expressed in terms of milligrams per gram); 7. the amount of any detected residual solvent in the product in the product in parts per million, except that this analyte will not be required for floral hemp material; detections may not meet or exceed the following amounts: a. butanes—800 ppm; b. heptanes—500 ppm; c. benzene—1 ppm; d. toluene—1 ppm; e. hexanes—10 ppm; f. xylenes—1 ppm; g. ethanol—5,000 ppm; this ethanol limit shall not apply to consumable hemp products designed and intended solely for topical use; 8. the amount of any detected pesticide residues in the product in parts per million; any detection above the limit of quantitation for a category I pesticide (see Table 1 of this Section) is defined as an exceedance and a basis for rejection of the product by the department; category II pesticides have maximum contaminant levels as defined in Table 1; 9. the amount of any microbiological contaminants in the product in appropriate units; total yeast/mold may not meet or exceed 10,000 colony-forming units per gram and total pathogenic Escherichia coli bacteria or Salmonella spp. may not meet or exceed 1 colony-forming unit per gram; 10. the amount of any detected heavy metal traces in the product in parts per million; detections may not meet or exceed the following amounts: a. arsenic (As)—10 ppm; b. cadmium (Cd)—4.1 ppm; c. lead (Pb)—10 ppm; d. mercury (Hg)—2 ppm; 11. a cannabinoid profile for the “active ingredient” (cannabinoid-containing distillate or isolate used in formulating the finished product) listing all major cannabinoid constituents by percentage of dry weight. D. Table 1: Category I and II Pesticides Name | Maximum Contaminant Level (MCL) in ppm Category I (includes aldicarb, carbofuran, chlorpyrifos, coumaphos, daminozide, dichloryos, dimethoate, ethoprop(hos), etofenprox, fenoxycarb, imazalil, methocarb, methyl parathion, meyinphos, paclobutrazol, propoxur, spiroxamine, and thiacloprid) | 0 Category II Abamectin | 0.3 Acephate | 5 Acetamiprid | 5 Acequinocyl | 4 Azoxystrobin | 40 Bifenazate | 5 Bifenthrin | 0.5 Boscalid | 10 Captan | 5 Carbaryl | 0.5 Chlorantraniliprole | 40 Clofentezine | 0.5 Cyfluthrin | 1 Cypermethrin | 1 Diazinon | 0.2 Dimethomorph | 20 Etoxazole | 1.5 Fenhexamid | 10 Fenpyroximate | 2 Flonicamid | 2 Hexythiazox | 2 Fludioxionil | 30 Imidacloprid | 3 Kresoxim-methyl | 1 Malathion | 5 Metalaxyl | 15 Methomyl | 0.1 Myclobutanil | 9 Naled | 0.5 Oxamyl | 0.2 Pentachloronitrobenzene | 0.2 Permethrin | 20 Phosmet | 0.2 Piperonylbutoxide | 8 Prallethrin | 0.4 Propiconazole | 20 Pyrethrins | 1 Pyradiben | 3 Spinetoram | 3 Spinosad | 3 Spiromesifen | 12 Spirotetramat | 13 Tebuconazole | 2 Thiamethoxam | 4.5 Trifloxystrobin | 30