Publications Incorporated by Reference

(1) When used in 310 CMR 30.000, the following publications are incorporated by reference: (a) "ASTM Standard Test Methods for Flash Point of Liquids by Setaflash Closed Tester," ASTM Standard D-3278-78, available from American Societyfor Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. (b) "ASTM Standard Test Methods for Flash Point by Pensky-Martens Closed Tester," ASTM Standard D-93-79 or D-93-80. D-93-80 is available from American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. (c) "ASTM Standard Method for Analysis of Reformed Gas by Gas Chromatography," ASTM Standard D 1946-82, available from American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. (d) "ASTM Standard Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method)," ASTM Standard D 2382-83, available from American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. (e) "ASTM Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis," ASTM Standard E 169-87, available from American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. (f) "ASTM Standard Practices for General Techniques of Infrared Quantitative Analysis," ASTM Standard E 168-88, available from American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. (g) "ASTM Standard Practice for Packed Column Gas Chromatography," ASTM Standard E 260-85, available from American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. (h) "ASTM Standard Test Method for Aromatics in Light Naphthas and Aviation Gasolines by Gas Chromatography," ASTM Standard D 2267-88, available from American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. (i) "APTI Course 415: Control of Gaseous Emissions," EPA Publication EPA-450/2-81­ 005, December 1981, available from National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. (j) "Flammable and Combustible Liquids Code" (1977 or 1981), available from the National Fire Protection Association, 470 Atlantic Avenue, Boston, MA 02210. (k) "Test Methods for Evaluating Solid Waste, Physical/Chemical Methods," EPA Publication SW-846 [Third Edition (November, 1986), as amended by Updates I (July1992), II (September 1994), IIA (August 1993), IIB (January 1995), III (December 1996), IIIA (April 1998)] and IIIB (November 2004)]. The Third Edition of SW-846 and associated updates are available for purchase from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161; or for purchase from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402, (202) 512-1800. For identification of the appropriate version of applicable methods, see 40 CFR 260.11(3), (3)(i) through (xxvii), inclusive, which is hereby incorporated by reference. (l) "ASTM Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteriscope", ASTM Standard D 2879-86, available from American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. (2) The references listed in 310 CMR 30.012(1) are also available for inspection at the Office of the Federal Register, 800 North Capitol Street, NW, Suite 700, Washington, DC. These incorporations by reference were approved by the Office of the Secretary of the Commonwealth of Massachusetts. These materials are incorporated as they exist on the date of approval and a notice of any change in these materials will be published in the Massachusetts Register.