Applications for Class B(3) Permits to Burn Off-specification Used Oil Fuel Generated at the Site

of Burning Any person who generates off-specification used oil fuel, and who wishes to burn such material at the site of generation for energy recovery in any device other than a used oil fired space heater, all in compliance with a Class B(3) permit, shall apply to the Department for a Class B(3) permit to do so. The application shall be on a form acceptable to the Department. In addition to what is set forth in 310 CMR 30.204, the application shall include: (1) Proof that the burning of the fuel in question in that facility has been approved by the Department pursuant to 310 CMR 7.00, and (2) A complete description of the characteristics of the fuel, and the variation in those characteristics, if appropriate, and (3) A complete description of the analysis procedure used to obtain the information described in 310 CMR 30.265(2), including, but not limited to, a statement naming each laboratory at which samples of the fuel were analyzed, whether and if so by whom each such laboratory is certified, and the quality assurance procedures to be used. (4) A complete description of how the fuel will be managed so that it will not be speculatively accumulated. (5) If the fuel is to be mixed with other fuels, a complete description of how such mixing will occur in compliance with 310 CMR 30.000.