R 324.810 Monitoring and filing records and reports.

Rule 810. (1) A permittee of a Class II well not utilized for secondary recovery shall, on a weekly basis, monitor and record the annulus pressure, injection pressure, injection rate, and weekly cumulative volume of the fluid injected. (2) A permittee of a Class II well utilized for secondary recovery injection well shall, on a monthly basis, monitor and record the annulus pressure, injection pressure, injection rate, and monthly cumulative volume of the fluid injected. A permittee of a secondary recovery injection well may conduct the monitoring and recording, required by this rule, on a field or project basis by manifold monitoring, rather than on an individual well basis, if more than 1 secondary recovery injection well operates with a single manifold, and if the permittee demonstrates that manifold monitoring is comparable to individual well monitoring. (3) A permittee of an injection well not utilized for secondary recovery shall report the data monthly to the supervisor, unless the supervisor requires a lesser frequency, on forms prescribed by the supervisor. (4) A permittee of a secondary recovery injection well shall report the monthly data annually to the supervisor, on forms prescribed by the supervisor by March 1 of each year for the previous year. (5) In addition to other requirements within this rule, a permittee of a Class II commercial disposal well shall submit a complete list of sources of disposed fluids on a quarterly basis on a form prescribed by the supervisor within 45 days of the end of each quarter. The provisions of this subrule are effective only upon the date of primacy. (6) In addition to other requirements within this rule, a permittee of a Class II commercial disposal well shall submit information on any new source to the supervisor, and shall obtain approval of the source from the supervisor or authorized representative of the supervisor, prior to injection of fluids from that source. The provisions of this subrule are effective only upon the date of primacy. (7) A permittee of a Class II well shall file on a quarterly basis the fluid loss or gain in the tubing-casing annulus on a form prescribed by the supervisor within 45 days of the end of each quarter. Rule authorized wells are exempt from this requirement. The provisions of this subrule are effective only upon the date of primacy. (8) The permittee of a Class II well shall submit an annual chemical analysis of the injectate using same analytes as R 324.802(g)(iv) by March 1 of the following year, or more frequently if there has been a change in sources or characteristics of the injectate. (9) The permittee shall retain all records pertaining to a Class II injection well for a period of 5 years. (10) The permittee of any Class II well shall indicate on any submitted report observed noteworthy anomalies or problems identified related to that data. The permittee shall report exceedance of the Maximum Injection Pressure on injection monitoring reports. The provisions of this subrule are effective only upon the date of primacy.