Special requirements for hazardous wastes F020, F021, F022, F023, F026, and F027

1. Hazardous wastes F020, F021, F022, F023, F026, and F027 must not be placed in waste piles that are not enclosed (as defined in subsection 3 of section 33.1-24-05-130) unless the owner or operator operates the waste pile in accordance with a management plan for these wastes that is approved by the department pursuant to the standards set out in this subsection and in accord with all other applicable requirements of sections 33.1-24-05-01 through 33.1-24-05-190, 33.1-24-05-300 through 33.1-24-05-524, 33.1-24-05-550 through 33.1-24-05-559, and 33.1-24-05-800 through 33.1-24-05-819. The factors to be considered are: a. The volume, physical, and chemical characteristics of the wastes, including their potential to migrate through soil or to volatilize or escape into the atmosphere; b. The attenuative properties of underlying and surrounding soils or other materials; c. The mobilizing properties of other materials codisposed with these wastes; and d. The effectiveness of additional treatment, design, or monitoring techniques. 2. The department may determine that additional design, operating, and monitoring requirements are necessary for piles managing hazardous wastes F020, F021, F022, F023, F026, and F027 in order to reduce the possibility of migration of these wastes to ground water, surface water, or air so as to protect human health and the environment.