250-RICR-120-05-3
250-RICR-120-05-3. Particulate Emissions from Industrial Processes (version Periodic Refile, 12/31/2001 to 07/19/2007)
AIR POLLUTION CONTROL REGULATION NO. 3
PARTICULATE EMISSIONS FROM INDUSTRIAL PROCESSES
Effective 2 August 1967
Last Amended 22 February 1977
3-1
RHODE ISLAND DEPARTMENT OF ENVIRONMENTAL MANAGEMENT
DIVISION OF AIR RESOURCES
AIR POLLUTION CONTROL REGULATION NO. 3
PARTICULATE EMISSIONS FROM INDUSTRIAL PROCESSES
1. Particulate Emissions from Industrial Processes
3.1 Definitions
As used in these regulations, the following terms shall, where the context permits, be
construed as follows:
3.1.1 "Process weight" means the total weight of all materials introduced into any specific
process, except liquid and gaseous fuels and combustion air, which may cause any
emissions of particulate matter into the atmosphere.
3.2 Limitations
No person shall emit into the atmosphere in any one hour from any source, except those
specific types of sources to which emission standards elsewhere in these rules and regulations
apply, particulate matter in excess of that shown in the following table opposite the applicable
process weight. In entering the table "the process weight rate" will be determined by dividing
the total process weight by the number of hours in one complete operation, excluding anytime
during which the equipment is not operating.
3.3 Determination of Compliance
Compliance with Section 3.2 shall be determined by one of the following procedures:
(a) Emission testing conducted by the owner or operator of the source according to Method 5
of Appendix A to Part 60 of Title 40 of the Code of Federal Regulations, or by another
method which has the prior approval of or is required by the Director.
(b) Technical evaluation based on such factors which may include the potential of the
industrial process for emitting particulates; design of the process, equipment or facility;
design efficiency of air pollution control systems; and emission test results on similar
processes, equipment or facilities.
3-2
TABLE
Process Weight Rate
Rate of
Emission
Process Weight Rate
Rate of
Emission
Lb/Hr
Tons/Hr
Lb/Hr
Lb/Hr
Tons/Hr
Lb/Hr
100
0.05
0.551
16,000
8.00
16.5
200
0.10
0.877
18,000
9.00
17.9
400
0.20
1.40
20,000
10.00
19.2
600
0.30
1.83
30,000
15.00
25.2
800
0.40
2.22
40,000
20.00
30.5
1,000
0.50
2.58
50,000
25.00
35.4
1,500
0.75
3.38
60,000
30.00
40.0
2,000
1.00
4.10
70,000
35.00
41.3
2,500
1.25
4.76
80,000
40.00
42.5
3,000
1.50
5.38
90,000
45.00
43.6
3,500
1.75
5.96
100,000
50.00
44.6
4,000
2.00
6.52
120,000
60.00
46.3
5,000
2.50
7.58
140,000
70.00
47.8
6,000
3.00
8.56
160,000
80.00
49.0
7,000
3.50
9.49
200,000
100.00
51.2
8,000
4.00
10.40
1,000,000
500.00
69.0
9,000
4.50
11.20
2,000,000
1,000.00
77.6
10,000
5.00
12.0
6,000,000
3,000.00
92.7
12,000
6.00
13.6
Interpolation of the data in this table for the process weight rates up to 60,000 Lb/Hr shall
be accomplished by use of the equation: E = 4.10 P0.67, and interpolation and extrapolation
of the data for process weight rates in excess of 60,000 Lb/Hr shall be accomplished by the
equation: E = 55.0 P0.11 - 40, where E = rate of emission in Lb/Hr and P = process weight
rate in Tons/Hr.