R156-55a-301ai. Specialty Contractors -- S280 Roofing Contractor

The scope of practice for an S280 - Roofing Contractor as a specialty contractor license under Subsection 58-55-301(2)(x) is defined in this subsection. (1) Scope. A licensee under this subsection may apply and install asphalt, pitch, tar, felt, flax, shakes, shingles, roof tile, slate, and any other material or materials, or any combination of these materials that use and custom has established as usable for, or that are now used as, water-proof, weatherproof, or watertight seal or membranes for roofs and surfaces. (2) Inclusions and Exclusions. The scope described in Subsection 301ai(1) includes: (a) any material attached to the roof; (b) roof conversion; (c) installation of non-electrical skylights; (d) installation of electrical skylights, if the electrical connection is performed by an E200 or E201 contractor; (e) installation of any insulating media in buildings and structures for the sole purpose of temperature control, sound control, fireproofing, and mechanical insulation of pipes, ducts, or conduits; and (f) incidental work including the installation of a roof clamp ring to the roof drain. (3) Subcontracting and Hiring. An S280 licensee providing services under this Chapter may not subcontract or hire any person to perform work on a project outside the scope defined in Subsection R156-55a-301ai(1) except an E200 General Electrical Contractor or E201 Residential Electrical Contractor for electrical work provided such work falls within the scope of practice for that E200 or E201 licensee for that work.