R156-55a-301aj. Specialty Contractors -- S440 Sign Installation Contractor

The scope of practice for an S440 - Sign Installation Contractor as a specialty contractor license under Subsection 58-55-301(2)(x) is defined in this subsection. (1) Scope. A licensee under this subsection may fabricate, install, and erect electrical or non-electrical signs and graphic displays that require installation permits or permission issued by state or local government jurisdictions. (2) Inclusions and Exclusions. The scope described in Subsection 301aj(1): (a) requires all signs and graphic displays be fabricated, installed, and erected in accordance with professionally engineered specifications and wiring in accordance with the National Electrical Code; and (b) excludes any electrical trade work described in Subsection 58-55-102(18)(a) and electrical work as defined Subsection R156-55b-102(1). (c) Nothing in Subsection R156-55a-301aj(2)(b) will be interpreted to prevent an S440 licensee from performing minor electrical work incidental to a mechanical or service installation when wiring is extended to no more than 10 feet from an existing outlet or disconnect and does not exceed 120 volts and 20 amperes as described in Subsection 58-55-102(18)(b)(vi). (3) Subcontracting and Hiring. An S440 licensee providing services under this Chapter may not subcontract or hire any person to perform work on a project outside the scope defined in Subsection R156-55a-301aj(1) except holders of An S440 Sign Installation Contractor may hire or subcontract an E200 General Electrical Contractor or E201 Residential Electrical Contractor for electrical work provided such work falls within the scope of practice for that E200 or E201 licensee for that work.