Washington · Regulations
Chapter 296-807 — PORTABLE POWER TOOLS
60 sections
60 sections
- WAC 296-807-099WAC 296-807-099. Definitions
- WAC 296-807-100WAC 296-807-100. Scope
- WAC 296-807-110WAC 296-807-110. Switches (controls)
- WAC 296-807-120WAC 296-807-120. Portable circular saws
- WAC 296-807-130WAC 296-807-130. Portable belt sanding machines
- WAC 296-807-140WAC 296-807-140. Compressed air tools
- WAC 296-807-150WAC 296-807-150. Powder actuated fastening systems
- WAC 296-807-160WAC 296-807-160. Power lawnmowers
- WAC 296-807-170WAC 296-807-170. Jacks
- WAC 296-807-180WAC 296-807-180. Portable tools using abrasive wheels
- WAC 296-807-11005WAC 296-807-11005. Make sure switches are safe
- WAC 296-807-12005WAC 296-807-12005. Make sure portable circular saws are safe to use
- WAC 296-807-13005WAC 296-807-13005. Guard portable belt sanding machines
- WAC 296-807-14005WAC 296-807-14005. Follow the manufacturer's instructions
- WAC 296-807-14010WAC 296-807-14010. Prevent air tools from ejecting attachments
- WAC 296-807-14015WAC 296-807-14015. Protect employees from contact with compressed air
- WAC 296-807-14020WAC 296-807-14020. Make sure safeguards are used when cleaning with compressed air
- WAC 296-807-14025WAC 296-807-14025. Make sure airhose and plastic pipe supplying compressed air to portable air tools are safe
- WAC 296-807-14030WAC 296-807-14030. Make sure air tools are adequately designed and constructed
- WAC 296-807-14035WAC 296-807-14035. Use air tools safely
- WAC 296-807-14040WAC 296-807-14040. Make sure fastener driving air tools (nailers and staplers) are safe
- WAC 296-807-15005WAC 296-807-15005. Make sure tool operators are qualified
- WAC 296-807-15010WAC 296-807-15010. Make sure employees are aware tools are in use and wear appropriate personal protective equipment (PPE)
- WAC 296-807-15015WAC 296-807-15015. Make sure tools are adequately designed and constructed
- WAC 296-807-15020WAC 296-807-15020. Make sure tools and containers are properly labeled
- WAC 296-807-15025WAC 296-807-15025. Make sure powder loads and power levels are properly identified
- WAC 296-807-15030WAC 296-807-15030. Use proper powder loads
- WAC 296-807-15035WAC 296-807-15035. Make sure the tool is appropriate to the job
- WAC 296-807-15040WAC 296-807-15040. Make sure the operator uses the tool safely
- WAC 296-807-15045WAC 296-807-15045. Use fasteners safely
- WAC 296-807-15050WAC 296-807-15050. Inspect and maintain tools properly
- WAC 296-807-15055WAC 296-807-15055. Make sure tools are stored properly
- WAC 296-807-16005WAC 296-807-16005. Make sure equipment meets minimum design and construction requirements
- WAC 296-807-16010WAC 296-807-16010. Make sure the equipment has the appropriate labels and decals
- WAC 296-807-16015WAC 296-807-16015. Make sure the operator understands and follows instructions before starting the mower
- WAC 296-807-16020WAC 296-807-16020. Use the equipment safely
- WAC 296-807-16025WAC 296-807-16025. Protect employees from fuel and exhaust
- WAC 296-807-16030WAC 296-807-16030. Use walk-behind mowers safely
- WAC 296-807-16035WAC 296-807-16035. Use ride-on mowers safely
- WAC 296-807-17005WAC 296-807-17005. Make sure jacks are labeled with their rated load(s)
- WAC 296-807-17010WAC 296-807-17010. Make sure the jack is safe to lift the load
- WAC 296-807-17015WAC 296-807-17015. Lift the load safely
- WAC 296-807-17020WAC 296-807-17020. Visually inspect jacks and keep them in good working order
- WAC 296-807-18005WAC 296-807-18005. Make sure abrasive wheels and tools are properly designed and constructed
- WAC 296-807-18010WAC 296-807-18010. Make sure machines have safety guards
- WAC 296-807-18015WAC 296-807-18015. Keep safety guards in good functional condition
- WAC 296-807-18020WAC 296-807-18020. Use specific safety guards for machines using Type 1 grinding wheels, cutting-off wheels, and tuck pointing wheels
- WAC 296-807-18025WAC 296-807-18025. Use specific safety guards for vertical and angle grinders using Type 6 or Type 11 wheels
- WAC 296-807-18030WAC 296-807-18030. Use specific safety guards for vertical and angle grinders using Type 27, 28 and 29 wheels
- WAC 296-807-18035WAC 296-807-18035. Use side handles on vertical and angle grinders
- WAC 296-807-18040WAC 296-807-18040. Make sure abrasive wheels are safe to use
- WAC 296-807-18045WAC 296-807-18045. Mount wheels properly
- WAC 296-807-18050WAC 296-807-18050. Use proper flanges
- WAC 296-807-18055WAC 296-807-18055. Make sure flanges are in good condition
- WAC 296-807-18060WAC 296-807-18060. Use specific flanges for Type 1 cutting-off wheels
- WAC 296-807-18065WAC 296-807-18065. Use specific flanges for Type 27A cutting-off wheels
- WAC 296-807-18070WAC 296-807-18070. Use specific flanges for threaded hole wheels
- WAC 296-807-18075WAC 296-807-18075. Use specific flanges for cup, cone or plug wheels with threaded inserts or projecting studs
- WAC 296-807-18080WAC 296-807-18080. Use blotters when required
- WAC 296-807-18085WAC 296-807-18085. Meet specific blotter requirements when using modified Types 6 and 11 wheels (terrazzo)