WAC 296-807-15010. Make sure employees are aware tools are in use and wear appropriate personal protective equipment (PPE)

(1) You must make sure eye or face protection is worn by: (a) Tool operators; (b) Assistants; (c) Persons close to where the tool is being used. (2) You must post signs where tools are being used and in adjacent areas where tool use could pose a hazard. Signs must: (a) Be easily seen; (b) Be at least 8 x 10 inches (20 x 25 cm); (c) Use letters in boldface type at least one inch (2.5 cm) high; (d) Read " powder actuated tool in use " or similar wording. Note: Tool use could create a hazard in adjacent areas by allowing a fastener to penetrate one or more of the following: 1. Wall; 2. Floor; 3. Other working surface.