Washington · Regulations
Chapter 296-863 — FORKLIFTS AND OTHER POWERED INDUSTRIAL TRUCKS
40 sections
40 sections
- WAC 296-863-099WAC 296-863-099. Definitions
- WAC 296-863-100WAC 296-863-100. Scope
- WAC 296-863-200WAC 296-863-200. Design, construction, and equipment
- WAC 296-863-300WAC 296-863-300. Inspection, repair, maintenance, and servicing
- WAC 296-863-400WAC 296-863-400. Operations
- WAC 296-863-500WAC 296-863-500. Hazardous (classified) locations
- WAC 296-863-600WAC 296-863-600. Training
- WAC 296-863-20005WAC 296-863-20005. Make sure PITs meet design and construction requirements
- WAC 296-863-20010WAC 296-863-20010. Meet these requirements when modifying or altering PITs
- WAC 296-863-20015WAC 296-863-20015. Make sure PITs are properly labeled
- WAC 296-863-20020WAC 296-863-20020. Protect operators from falling objects
- WAC 296-863-20025WAC 296-863-20025. Provide fall protection on order pickers
- WAC 296-863-20030WAC 296-863-20030. Provide directional lights on PITs when required
- WAC 296-863-20035WAC 296-863-20035. Make sure liquefied petroleum gas (LPG) fueled PITs meet these requirements
- WAC 296-863-20040WAC 296-863-20040. Meet these requirements when converting gasoline fuel PITs to liquefied petroleum gas (LPG) fuel
- WAC 296-863-30005WAC 296-863-30005. Make sure PITs are in safe working condition
- WAC 296-863-30010WAC 296-863-30010. Inspect your PITs
- WAC 296-863-30015WAC 296-863-30015. Meet these requirements when repairing PITs
- WAC 296-863-30020WAC 296-863-30020. Maintain your PITs properly
- WAC 296-863-30025WAC 296-863-30025. Service gasoline fueled PITs safely
- WAC 296-863-30030WAC 296-863-30030. Service liquefied petroleum gas (LPG) fueled PITs safely
- WAC 296-863-30035WAC 296-863-30035. Make sure battery charging areas are safe
- WAC 296-863-30040WAC 296-863-30040. Service batteries for electric PITs safely
- WAC 296-863-40005WAC 296-863-40005. Protect employees around PITs
- WAC 296-863-40010WAC 296-863-40010. Operate PITs safely
- WAC 296-863-40015WAC 296-863-40015. Make sure PIT loads are carried safely
- WAC 296-863-40020WAC 296-863-40020. Meet these requirements when the operator leaves the normal operating position
- WAC 296-863-40025WAC 296-863-40025. Meet these requirements when operating near railroad tracks
- WAC 296-863-40030WAC 296-863-40030. Meet this requirement when using motorized hand trucks
- WAC 296-863-40035WAC 296-863-40035. Meet these requirements when using elevators
- WAC 296-863-40040WAC 296-863-40040. Meet these requirements when using dock-boards (bridge plates)
- WAC 296-863-40045WAC 296-863-40045. Meet these requirements when loading or unloading railroad cars with a PIT
- WAC 296-863-40050WAC 296-863-40050. Meet these requirements when loading or unloading highway trucks with PITs
- WAC 296-863-40055WAC 296-863-40055. Meet these additional requirements when operating liquefied petroleum gas (LPG) fueled PITs
- WAC 296-863-40060WAC 296-863-40060. Make sure work platforms and PITs used to lift people meet these requirements
- WAC 296-863-40065WAC 296-863-40065. Operate PITs using elevated work platforms safely
- WAC 296-863-50005WAC 296-863-50005. Use the appropriate PITs in hazardous (classified) locations
- WAC 296-863-60005WAC 296-863-60005. Make sure PIT operators are trained
- WAC 296-863-60010WAC 296-863-60010. Retrain PIT operators as required
- WAC 296-863-60015WAC 296-863-60015. Evaluate PIT operators performance